[mythtv] No luck with LIRC...
John
johnmythtv at crombe.com
Fri Jan 31 08:32:10 EST 2003
Hi Pete,
I don't seem to have a /dev/lirc/0 (wouldn't it show up below if I did?).
Tried to insmod lirc_dev and it didn't find it. I searched and found the .c
in the drivers/lirc_dev directory. Went there and did a make there (make
install too but even after that I had to do an insmod lirc_dev.o for it to
find that module). Anyway, I can now load EITHER insmod lirc_serial OR
lirc_dev but not both. Depending on the order, I either get "Device or
resource busy" (lirc_serial first) or "init_module: Input/output error"
(lirc_dev first). Do you have both modules installed together? If so, in
what order? Maybe each module needs to be associated with a unique device
(like "lircd" and "lird" or "lirc/0")?
Any more tips would help!
Thanks,
JC
----- Original Message -----
From: "Pierre-Olivier Bouchard" <petecool at vl.videotron.ca>
To: "Development of mythtv" <mythtv-dev at snowman.net>
Sent: Friday, January 31, 2003 7:28 AM
Subject: Re: [mythtv] No luck with LIRC...
>
> > Here's how a ll of my lirc* devices look:
> >
> > crw-rw-rw- 1 root root 61, 0 Jan 15 05:08 /dev/lirc
> > srw-rw-rw- 1 root root 0 Jan 31 01:16 /dev/lircd=
> > prw-r--r-- 1 root root 0 Jan 30 04:48 /dev/lircm|
> >
>
> Try to use /dev/lirc/0 if you have one (modprobe'ing in the lirc_dev and
> lirc_serial might help if they weren't automatically loaded).
>
> I had to do that to make it work.
>
>
> Pete
> _______________________________________________
> mythtv-dev mailing list
> mythtv-dev at snowman.net
> http://www.snowman.net/mailman/listinfo/mythtv-dev
>
>
More information about the mythtv-dev
mailing list