<div dir="ltr"><div>Hi Jason,</div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, 7 Jul 2024 at 17:52, Jason Baker <<a href="mailto:jason.baker0@gmail.com">jason.baker0@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div>hi,</div><div><br></div><div>I'm in the process of setting up mythtv (v34) and related services.  I've got two usb tuner cards hooked up to indoor antennas in orthogonally facing windows (one east and one south).  I'm looking for the best way to ensure that each transmitter is read from the best available input for both recordings and live tv.  I'm also curious about the behaviour of manually deleted channels, which seemed surprising in a previous and now abandoned backend install..<br></div><div><br></div><div>How do broadcast TV watchers normally deal with these issues?<br></div><div><br></div></div></blockquote><div>First thing, you need two video sources, one video source for each tuner. Then you do two channel scans, one for each tuner. </div><div>With classic mythtv-setup, use the option "-v chanscan"and then you get a lot of debug output including the signal strength for each multiplex.</div><div>You can then, again with classic mythtv-setup, delete the multiplexes (transports) with the weakest signals so that you keep only the transports with strong signals.</div><div>Make sure that you leave enough transports so that you do receive all the channels that you want.</div><div>Alternatively, you can set channels to invisible for each video source separately.</div><div>For an exhaustive description of the channel scanning, see the Wiki page <a href="https://www.mythtv.org/wiki/Channel_Scanning">https://www.mythtv.org/wiki/Channel_Scanning</a></div><div>N.B. In principle everything that is possible with classic mythtv-setup can also be done with the mythbackend web configuration on port 6544. However, I am not an expert on the web interface.</div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div></div><div>LIVE TV</div><div><br></div><div>Here's what I'm seeing with live TV on mythfrontend:</div><div>1. Navigating to a channel through the keypad seems to dynamically pick the source with the best signal, which is great.</div></div></blockquote><div>It might be great if it worked like this but this is not how I understand it to work. </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div>2. Changing channels with the arrow keys seems to keep the same input, even when switching a transmitter the other input is better situated for.</div></div></blockquote><div>Changing channels with the arrow keys does keep you on the same input and thus on the same video source.</div><div>This is the expected behavior.  </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div>3. Swapping sources with 'y' implicitly switches to the current or default channel of the new input, rather than tuning the new input to the current channel.</div></div></blockquote><div>This is the expected behavior. I do agree it would be nice if it keeps the same channel if that is also available on the new input.</div><div>This will only work when the new input is connected to the same video source as the old input, or if both video sources receive the same signal, which is true in your case. </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div><br></div><div>This seems less than ideal.  I would much rather see:</div><div>1. Navigating to a channel on a new transmitter dynamically chooses the best available input all the time.</div><div>2. Swapping sources with 'y' tunes the new source to the client's current channel whenever possible.</div><div><br></div><div>Is there a way to make this happen on both mythfrontend and the Kodi client?</div></div></blockquote><div>No, it does not work like this in mythfrontend. I do not know how it works on Kodi. </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div><br></div><div>RECORDINGS</div><div><br></div><div>I would like to statically assign all my recordings to the best source, because I don't want some transient signal strength inversion to throw a recording onto the wrong input for a whole hour.</div><div><br></div><div>From <a href="http://backend:6544" target="_blank">http://backend:6544</a>, it looks like I can use "Schedule Order" to favor one source over the other for all transmitters.  It would be great if I could set this parameter on a per-transmitter basis instead of globally.  It seems like I can more-or-less simulate this behavior by:</div><div>1.  finding all the transmitters (one?) that work best with the secondary source</div><div>2. removing all their channels from the primary source lineup</div><div>3. using "Schedule Order" to favor the primary source for all channels available from both sources</div><div><br></div><div>The clear downside is that LiveTV  no longer has the option of playing any channel from either source.  I would say this is the only downside if I had a clear idea of how to undelete channels I remove from a source.</div></div></blockquote><div>See description above. </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div><br></div><div>CHANNEL DELETE/UNDELETE</div><div><br></div><div>I initially assumed that you could undelete a channel by rediscovering it in a full channel scan.  This did not seem to work with my old mythtv install, but I may have been confused about something else.  What _is_ the easiest way to undelete a channel you've deleted in the channel editor?</div><div><br></div></div></blockquote><div>You cannot undelete a channel once it is deleted. You can however do a new scan and then the channel will be found again.</div><div>Note that the raw data from each scan is saved and can be used to redo the scan from the saved data. This is much faster than letting the tuner scan everything again.</div><div>Note that it is much better to set a channel to invisible with the Channel Editor (in classic mythtv-setup or with the web interface). It will then not be used, not in the program guide and also not for scheduled recordings or for live TV, but you can easily set it to visible again in the Channel Editor.</div><div> <br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div></div><div>thanks,</div><div><br></div><div>Jason</div><div><br></div></div></blockquote><div>Hope this helps,</div><div>Klaas.</div><div> </div></div></div>