<div dir="ltr"><div dir="ltr"><br></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Jul 6, 2023 at 11:04 AM James Abernathy <<a href="mailto:jfabernathy@gmail.com">jfabernathy@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">I just did a fresh build of mythtv on a Raspberry Pi 4 4GB. I used the AUR mythtv-git package modifying for aarch64 and Master.  It runs okay but unlike a build from a week or so ago the mythfrontend jitter is now around +/- 0.55 to 0.66 vs.0.03 to 0.22 with previous versions. It is noticeable. <div><br></div><div>In the past v34 (master) was better than v33 by a little bit on the RPI4. But something has changed.</div><div><br></div><div>I always use mythfrontend settings to use OpenGL with 4 in the Max CPU field with low quality in both Deinterlacer quality fields. I tested with the V4L2 settings but they were identical to OpenGL which in the past were worse than OpenGL.</div><div><br></div><div>Jim A</div></div></blockquote><div><br></div><div>This can be marked up to the mysteries of life.  After a lot of testing to confirm the bad results I shutdown the RPI4 and replaced the SSD with one from a few days ago. It was better results; back to what I expected.  I confirmed that it was indeed the same version of mythtv and the same kernel. So I replaced the SSD with the one giving me problems. I booted and reconfirmed the kernel and mythtv versions and the mythfrontend settings.  This time the jitter was back to the expected level.  </div><div><br></div><div>So never mind. </div><div><br></div><div>Jim A</div><div><br></div></div></div>