<div dir="ltr"><div dir="ltr"><br></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Mar 19, 2023 at 6:55 AM James Abernathy <<a href="mailto:jfabernathy@gmail.com">jfabernathy@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">I moved my mythtv backend back to the original NUC now that I have the NUC fan repaired. I rsync'ed my files back, restored the database, and ran mythtv-setup on my NUC and saw the IP address had changed so I selected the new one.  <div><br></div><div>I finished testing out the system.  Later I saw that on reboot the NUC was back on Ethernet and not wifi so I disabled WiFi. I went back into mythtv-setup and tried to change the IP again, but now mythtv-setup has a segment fault. </div><div><br></div><div>Visually, mythtv-setup starts. shows the menu and then that disappears and you have the message boxes pop up asking if you want to start the backend and run mythfilldatabase.</div><div><br></div><div>I need to figure this out, so any help is appreciated.</div><div><br></div><div>Jim A<br></div></div></blockquote><div><br></div><div>I have a workaround but not a fix.  If I use systemctl to stop the mythtv-backend and then run mythtv-setup.real that works. I was able to set the IP address and now my system is working properly.  However, I still can't run mythtv-setup without using .real.</div><div><br></div><div>BTW, this is mythtv fixes/33 on Linux Mint 21.1 (Ubuntu 22.04).</div><div><br></div><div>Jim A</div><div><br></div><div><br></div><div>Jim A</div><div> </div></div></div>