<div dir="ltr">Hi,<div><br></div><div>I am upgrading my mythtv setup from version .29 to .32.  I have everything working except my remote.  I installed Mythbuntu CC and configured my remote.  I am able to use the arrow keys and the power button sleeps the machine (dont want).  Doing some reading i think my remote is emulating a keyboard with ir-keytable.  when i do "ir-keytables -t" I can see all the button presses.  BUT when i go into mythtv and try and program buttons such as back, ok, or jumppoints it shows nothing.  is there a config file between ir-keytables and mythtv that i am missing?  Last time i did this it was all with LIRC should i switch back?</div><div><br></div><div>using a MCE remote:</div><div>mitchell@mythtv:~$ sudo ir-keytable<br>Found /sys/class/rc/rc0/ with:<br>        Name: Media Center Ed. eHome Infrared Remote Transceiver (1934:5168)<br>        Driver: mceusb<br>        Default keymap: rc-rc6-mce<br>        Input device: /dev/input/event7<br>        LIRC device: /dev/lirc0<br>        Attached BPF protocols: Operation not supported<br>        Supported kernel protocols: lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp imon rc-mm<br>        Enabled kernel protocols: lirc rc-6<br>        bus: 3, vendor/product: 1934:5168, version: 0x0001<br>        Repeat delay = 500 ms, repeat period = 125 ms<br></div></div>