<div dir="ltr"><div dir="ltr"><br></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Jul 25, 2021 at 10:24 AM Stephen Worthington <<a href="mailto:stephen_agent@jsw.gen.nz">stephen_agent@jsw.gen.nz</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">On Sun, 25 Jul 2021 09:17:35 -0400, you wrote:<br>
<br>
><br>
>On 7/25/21 8:18 AM, Stephen Worthington wrote:<br>
>> On Sun, 25 Jul 2021 07:27:16 -0400, you wrote:<br>
>><br>
>>> This problem is most likely caused by changing HDMI inputs away from my<br>
>>> PC and then back again. It's more subtle than it was a few years ago<br>
>>> when I was chasing this on 1080P.<br>
>>><br>
>>> I've recently tried setting my PC to UHD 4K with a scale factor of 200%<br>
>>> on any *buntu version with 5.11 kernel so I have gfx software new enough<br>
>>> to support my 11th gen Intel based NUC.<br>
>>><br>
>>> This seems to help 1080 content like mythtv since the TV in UHD improved<br>
>>> HD content.<br>
>>><br>
>>> If I set my HDMI 2.0 switch to the NUC and boot it, my TV is rock solid<br>
>>> regardless of what video I play, mythtv, streaming, games, etc.<br>
>>><br>
>>> If I leave the NUC on and switch to another HDMI source and later back<br>
>>> to the NUC I get the occasional screen blanking and loss of audio for<br>
>>> about 1-2 seconds. This repeats randomly.<br>
>>><br>
>>> I can fix this by:<br>
>>><br>
>>> 1. rebooting or<br>
>>><br>
>>> 2. setting the screen to 1080p 100% scaling.<br>
>>><br>
>>> This sound like that old problem where you had to capture the EDID in a<br>
>>> file and play with xorg.conf so the settings got reset with an HDMI<br>
>>> event like switching.<br>
>>><br>
>>> I can't find that old discussion.  I have not had to do any such tricks<br>
>>> is a very long time.  This just started when I changed to 4K settings<br>
>>> instead of HD.  It's always been a 4K TV. I thought it might be hardware<br>
>>> but all the cables and switches are 4K@60 HDMI 2.0 rated.<br>
>>><br>
>>> At this point I just reboot each time I want to connect the PC to to the TV.<br>
>>><br>
>>> Any ideas??<br>
>> You could get a better HDMI switch - I think there are ones that will<br>
>> remember the EDID data and emulate the presence of the TV on any ports<br>
>> where the real TV is not connected.  Full KVM switches seem to usually<br>
>> have that feature.  But good HDMI KVM switches are not cheap.<br>
><br>
>The switch I picked was about $40 and worked great until I started <br>
>testing at 4K@60. I tried using the second HDMI on the TV but had issues <br>
>with that, so I didn't spend a lot of time with it. Since I split the <br>
>output of the switch with a HDMI 2.0 digital audio extractor. I didn't <br>
>want to go that route.<br>
><br>
>the switch I use is<br>
><br>
><a href="https://www.amazon.com/gp/product/B07MCS9PJD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="noreferrer" target="_blank">https://www.amazon.com/gp/product/B07MCS9PJD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1</a><br>
><br>
>Jim A<br>
<br>
There is no sign on that page of EDID support, so it likely does not<br>
have it.  HDMI switches with EDID support normally tell you as it is<br>
an important feature, and justifies higher cost.<br><br></blockquote><div>I did an experiment. I plugged in my NUC PC directly to my HDMI2 TV port.  I could not see anything until I changed the HDMI UHD color setting to turn OFF HDMI 2.0. At that point I could see the PC desktop, but it was only 4K@30.  To get 4K@60 I have to turn on HDMI 2.0 support.</div><div><br></div><div>So now I'm back on my HDMI 2.0 Switch and HDMI 2.0 support is turned on for that HDMI1 port. The PC is set to 4K@60 and the TV info shows 4K@60. I also have a Nividia Shield TV connected to the switch and it works at full 4K@60.</div><div><br></div><div>While trying to write this email the screen has blanked out for a second twice. </div><div><br></div><div>Rebooting seems to be my only choice.  However, I'm very curious why the PC directly connected to the TV HDMI2 port can run 4K@60 with the TV in HDMI 2.0 mode??</div><div><br></div><div>Since the EDID switches are expensive and so are newer UHD TV's, I'm stuff for now.</div><div><br></div><div>Jim A</div><div> </div></div></div>