<div dir="ltr"><div dir="ltr"><br></div><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><br></blockquote><div><br></div><div>I'm certainly seeing it after a reboot and, most recently, after running mythtv-setup to fiddle with capture card settings.  I haven't done a channel scan recently so I don't think that's the issue for me. </div></div></div></blockquote><div><br></div><div>Just to report back on this issue.</div><div><br></div><div>I ran mythtv-setup and modified the capture card settings for both cards:  I changed:</div><div><br></div><div>Signal Timeout to 7000</div><div>Tuning Timeout to 10000</div><div><br></div><div>...and I unchecked 'Open DVB Card on Demand'.</div><div><br></div><div>I think that last setting is unchecked by default, but I had turned it on the first time I set up my backend, because I read somewhere that this can speed up booting.  I never noticed any problems while I had a DVB-T card and a DVB-T2 card.  The problems appeared when I replaced the DVB-T card with a second T2 one.</div><div><br></div><div>Since changing those parameters about three weeks ago I've had no backend startup failures.  So that's all good.  I can't say I'm anywhere near understanding what the problem was though.</div><div><br></div><div>D</div><div><br></div><div><br></div></div></div>