<div dir="ltr"><div><div><div><div><div><div><div dir="ltr"><br></div>I'm running FC32 and, as far as I can tell, the device firmware is only being loaded at startup.  It's possible that it's loaded again whenever a recording is started.  It's hard to tell because that tuner is the second in the list and is rarely used.<br><br></div>While playing around with capture card settings I did manage to get the mythbackend startup to freeze without the firmware being loaded at the same time, so maybe that's a red herring anyway.<br><br></div>I'm a bit concerned by John's comment about a pause and sometimes hang on FC32/Master 32, since that's what I'm running and that's what I'm seeing.  (Although I have two DVB-T2 cards rather than one DVB-T and one DVB-T2.)<br><br></div>Just to answer some of the other questions.  This is a recent re-build on an old Zotac Ionitx B motherboard.  I've re-used the Nanostick 290 from the original system and replaced the Nova DVB-T USB capture device on the old system with a Nanostick 292e that I bought years ago and never got round to installing.  In the days when all the HD channels were on the same multiplex there wasn't much cause to.<br><br></div>With nothing in the myth logs to look at I'm a bit stuck for my next step.  I might remove the 292e card for a while to see if that makes a difference and perhaps there's a watchdog script someshere that resets the backend if it doesn't come up properly.<br><br></div>Thanks for all the help anyway and if I make any progress I'll update this thread.<br><br></div>D<br><div><div><div><div><div><br><br></div></div></div></div></div></div>