<div dir="ltr"><div class="gmail_quote"><div>Hi John, Stephen,</div><div><br></div><div>On my system, Fedora 33 with the TBS version of the drivers, I get the following for the MyGIca T230 USB tuner:</div><div>dmesg | grep si2157</div><div>[81708.931066] si2157 14-0060: found a 'Silicon Labs Si2158-A20'</div>[81708.931087] si2157 14-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw'<br>[81710.127330] si2157 14-0060: firmware version: 2.1.9<br>[81777.542157] si2157 14-0060: found a 'Silicon Labs Si2158-A20'<br>[81777.542214] si2157 14-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw'<br>[81778.737773] si2157 14-0060: firmware version: 2.1.9<br>[81846.110174] si2157 14-0060: found a 'Silicon Labs Si2158-A20'<br>[81846.110204] si2157 14-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw'<br>[81847.300054] si2157 14-0060: firmware version: 2.1.9<br>[81914.474541] si2157 14-0060: found a 'Silicon Labs Si2158-A20'<br>[81914.474565] si2157 14-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw'<br>[81915.647009] si2157 14-0060: firmware version: 2.1.9<br></div><div class="gmail_quote"><br></div><div class="gmail_quote">I have EIT running with a one minute interval, and the "Open DVB Card on Demand" option checked.</div><div class="gmail_quote">So it looks like that on each "open" the firmware is loaded again.</div><div class="gmail_quote">As said, this is outside the control of mythtv as this is something the driver itself decides.</div><div class="gmail_quote">On startup the backend currently opens each virtual tuner once, so there are a lot of these messages at startup if you have configured multirec for many instances.<br></div><div class="gmail_quote"><br></div><div class="gmail_quote">Last time I looked into this the firmware was only loaded once but I do not look into this very often so I do not know when the behavior has changed.</div><div class="gmail_quote"><br></div><div class="gmail_quote"> Klaas.<br></div><div class="gmail_quote"><br></div></div>