<div dir="ltr"><div dir="ltr">On Tue, Oct 27, 2020 at 8:45 AM Neil Salstrom <<a href="mailto:salstrom@gmail.com">salstrom@gmail.com</a>> wrote:<br></div><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">On Mon, Oct 26, 2020 at 11:18 AM John P Poet <<a href="mailto:jppoet@gmail.com" target="_blank">jppoet@gmail.com</a>> wrote:<br>
><br>
><br>
> Have you looked at Gary's ExternalRecorder for the HDHR?<br>
> <a href="https://github.com/garybuhrmaster/mythhdhrrecorder" rel="noreferrer" target="_blank">https://github.com/garybuhrmaster/mythhdhrrecorder</a><br>
><br>
> That should allow the tuning to work. The audio is still going to be a problem, though.<br>
><br>
> John<br>
<br>
I will look into the ExternalRecorder but I'm not sure this will fix<br>
one of the issues seen.  In the PDX area (and others from what I<br>
understand) both the ATSC 3.0 and ATSC 1.0 get mapped to the same<br>
virtual number.  For example, ATSC 1.0 RF 8 (subchannel 3) gets mapped<br>
to virtual 8.1 KGW.  At the same time, ATSC 3.0 RF 30 (subchannel 3)<br>
gets mapped to virtual 8.1 KGW as well.<br>
<br>
In MythTV we'll need to be able to tell it to use Tuner 0 or 1 (the<br>
ATSC 3.0 tuners) to record a show on virtual 8.1 but use the RF 30 if<br>
we want ATSC 3.0.  There will be some challenges to figure out the<br>
logic of tuner selection based on the mix of 1.0 and 3.0 tuners with<br>
the same virtual channel numbers.<br>
<br>
At this point, I think there is plenty of time to figure it out as the<br>
recordings are useless without being able to decode the audio!<br></blockquote><div><br></div><div>Do you have a preamp or receiver capable of decoding Dolby Atmos? If so, that should decode the AC-4 as well, from what I have read.<br></div><div><br></div><div>John<br></div></div></div>