<div dir="auto">There are potentially a couple of advantages to running at 1080p.<div dir="auto"><br></div><div dir="auto">Firstly any 4k TV worth its salt will do a better job of upscaling 1080 and/SD content than most media players. This is largely due to better, dedicated hardware. If you feed it 4K it can't do much scaling wise.</div><div dir="auto"><br></div><div dir="auto">Secondly, with the way mythtv rendering works at the moment, displaying both the UI and video at 4K is going to work the system harder - both in terms of gpu load and memory consumption. Admittedly it's probably not enough to be an issue on a modern, desktop system but will be relevant on less capable hardware (e.g. pi4 etc). All the current mythtv themes are max 1080 by design and scaling them up could be better handled in hardware - it's something on my to-do list.</div><div dir="auto"><br></div><div dir="auto">I would recommend enabling resolution switching , set both the UI and video resolution to 1920*1080 and use 'auto' for refresh rate matching. If you have some 4k content then add an override for that as well.</div><div dir="auto"><br></div><div dir="auto">(Note: display mode switching should work with 'regular' Linux and macos setups but is limited or not implemented in other cases e.g. no pure Wayland support in .31, raspberry pi without X can only switch refresh rate, other Linux without X no support)</div><div dir="auto"><br></div><div dir="auto">Regards</div><div dir="auto">Mark</div><div dir="auto"><br></div><div dir="auto"><br></div></div>