<div dir="ltr">I have a production backend and a development  backend. I put critical recordings on the production backend (RAID), less important recordings on the development backend.<div><br></div><div>The production backend has a 4 tuner OTA WinTV HD Quad PCIe card and both backends are on the same network as the HDHR Connect Duo and Quatro. So 4 PCIe tuners and 6 network tuners.</div><div><br></div><div>The use of the networked tuners is shared between the SiliconDust HD app on the smartTVs and mythtv.  </div><div><br></div><div>Traditionally, I've set up the production backend with 4 PCIe tuners and 4 HDHR tuners only on the Quatro.  The development system has 2 tuners defined only using the Duo. The SmartTV HD app will pick any HDHR open tuner on either of the HDHR tuner boxes.</div><div><br></div><div>Would it make more sense to have both backends configured to access both HDHRs boxes? I could still define 4 HDHR tuners for both backends but check the box for both the Duo and Quatro.</div><div><br></div><div>All tuners are connected to the same OTA antenna and all have about the same signal strength. As a practical matter we don't record more than 4 programs at a time. So this is more of an academic exercise in optimization. </div></div>