<div dir="ltr">The Subject question is one I've heard debated so here's the results of a test I ran.<div><br><div>1. Using Raspberry PI OS Lite, I build up a v31 mythtv combo.</div><div>2. I configured 2 Capture Card tuners; both in the same HDHR Connect (HDHR4-2US) i.e. 2 internal ATSC OTA tuners.</div><div>3. I turned off Constant EIT scanning since I'm using XMLTV EPG</div><div>4. In the Input Connection section I had only 2 connections to configure. In the section Interaction between inputs, I took the default which is Max recordings =1 and Schedule as a Group, Checked.</div><div><br></div><div>So when you look at mythfrontend -> Information Center ->System Status -> Input Status I originally saw before my test:</div><div>Input 1 Input 1:1 Available</div><div>Input 2 Input 2:1 Available</div><div><br></div><div>So the test was to record 3 programs from channels 5.1, 5.2, and 5.2. Then 2 programs from 17.1 and 17.2.</div><div>All 5 programs recorded at the same time.  So the documentation at <a href="https://www.mythtv.org/wiki/Setup_Input_Connections">https://www.mythtv.org/wiki/Setup_Input_Connections</a> is correct by my testing.  So no more setting the max recording for me.</div><div><br></div><div>JIm A</div><div><br></div></div></div>