<div dir="ltr"><div dir="ltr"><br></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, 3 Jun 2020 at 09:01, <a href="mailto:jam@tigger.ws">jam@tigger.ws</a> <<a href="mailto:jam@tigger.ws">jam@tigger.ws</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">I have long used (upto 30) a pair. of haupauge usb tuners<br>
<br>
I recenty upgraded to 31, and after a few fumbles<br>
<br>
I can scan channels<br>
  I get resonable. results<br>
  dmesg shows cards found, firmware loaded<br>
  epg gets reasonable results<br>
<br>
record a channel results in the red no later by X symbol<br>
Watch live TV shows signal strengh of 90% but no lock<br>
Record has the unable to get lock pop-up<br>
<br>
What can I be looking for. Using my lucky-packet cards does work, these cards used to work<br>
James<br>
<br><br></blockquote><div>I suggest to do a channel scan as follows:</div><div>- delete the capture cards</div><div>- create new capture cards; they will now have the latest default timeout values</div><div>- create a new video source</div><div>- connect the capture cards to the new video source</div><div>- do a channel scan, for receiving with an antenna the "Full Scan" is best</div><div>and then everything should work.</div><div><br></div><div>One possible reason is that the transports (transport stream multiplexes, stored in table dtv_multiplex) can have old/incorrect values and these values are not updated with a channel scan in v31. This is recently fixed in master.</div><div>Deleting the channels does not help for this because that does not delete the transports.</div><div><br></div><div>Another possible reason is that there are, in addition to new channels found with the channel scan, also old channels with the same name/callsign but with incorrect tuning data. Duplicate channels can greatly confuse the guide and the scheduler. </div><div><br></div><div>Both possibilities are eliminated by using a new video source.</div><div><br></div><div>The old video source can be deleted when you are happy with the new one.</div><div>In v31 the guide will only show channels from video sources that are connected to capture cards.</div><div><br></div><div>Creating new capture cards is the way to make sure that you have the actual default values for timeouts. The default timeout values are in v31 bigger than they used to be in v30 but maybe not yet big enough. Feedback on this is appreciated. </div><div><br></div><div>Klaas.</div><div><br></div><div><br></div><div><br></div><div><br></div><div><br></div><div> </div></div></div>