<div dir="auto"><div dir="ltr" style="font-family:sans-serif">On Sat, Dec 7, 2019, 10:40 AM Stephen Worthington, <<a href="mailto:stephen_agent@jsw.gen.nz">stephen_agent@jsw.gen.nz</a>> wrote:<br></div><blockquote style="font-family:sans-serif;margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><br><br><br>It would be really nice if the HDHRs tagged their packets with<br>real-time priority in the IP packet DSCP header bits.  Then you could<br>set up the Ethernet port so that the packets with high priority took<br>precedence over the standard priority packets and the HDHR traffic<br>would be able to get through even when the port was being used to full<br>capacity by other traffic.  Not having an HDHR, I am unable to take a<br>look at its packets to see what the DSCP bits are set to.  There are<br>some posts out on the net that suggest that the DSCP bits are set, so<br>if they are, it would be worthwhile taking a look at what it takes to<br>enable QoS processing on your Ethernet port - and on your Ethernet<br>switch also if it supports that.  But before that, someone with an<br>HDHR needs to run Wireshark or tshark or tcpdump to capture some HDHR<br>recording packets and confirm the DSCP bits are being set properly.<br></blockquote><div dir="auto"><br></div><div dir="auto">Don't know if this is helpful or outdated but did a search on HDHomerun and DSCP and this came up:</div><div dir="auto"><br></div><div dir="auto"><a href="http://mythtvblog.blogspot.com/2008/03/enabling-quality-of-service-for.html?m=1">http://mythtvblog.blogspot.com/2008/03/enabling-quality-of-service-for.html?m=1</a><br></div><div dir="auto"><br></div><div dir="auto"><br></div><blockquote style="font-family:sans-serif;margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><br></blockquote></div>