<div dir="ltr"><div dir="ltr"><br><br><div class="gmail_quote"><div dir="ltr">On Mon, Oct 22, 2018 at 3:25 PM Allen Edwards <<a href="mailto:allen.p.edwards@gmail.com">allen.p.edwards@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">Half just to find out and half as there are a couple of nice things about upgrading, like getting a supported browser and getting CC that works, that I would like so I bought some more RAM. My system now has 6GB of ram as I added 4GB to the 2GB that were there. The new RAM was slower but it is working.<div><br></div><div>Running Mythbuntu 16 there is no swap used and no glitching in a ten minute test.</div><div><br></div><div>But the remote suddenly doesn't work.  Something to do with the HDHR.  I switched back to the Mythbunty 8 system and turner and remote are fine.  I have no idea where to start debugging the Mythbunty 16 system with no remote. irw does not respond and there is a green light on the tuner that says the tuner is in use when it should not be.  I switched back to the 8 system things look and act normal.</div><div><br></div><div>It is a pain to switch between systems as the Mythbunty 8 system needs the 6200 video card and the Mythbunty 16 needs the 750ti video card.</div><div><br></div><div>I bought a 2T Red drive but will wait to use it until I decide which system to put on it.  If I can get some help on the remote issue, I will try and fix it.  The remote use to work with Mythbuntu 16.  The only thing I did that I should not have is start the 16 disk before I switched the video card.  That was a pain in getting the monitors right but I can't see how that would mess up lircd.</div><div><br></div><div>Allen</div></div></blockquote><div><br></div><div>The remote was enabled by a kludge in rc.local and that quit working because a command preceding the kludge failed.</div><div><br></div><div>It was  "echo -n 15  > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold" which was intended to modify the cpu frequency scaling.  rc.local ran before I increased the RAM. I commented out that line and now the remote works.</div><div><br></div><div>I am going to try the Mythbuntu system and see if it is stable.</div><div><br></div><div>Allen</div><div><br></div></div></div></div>