<div dir="ltr"><div>On Tue, Aug 21, 2018 you wrote:<br><br>>My first guess would be path MTU of your Open VPN tunnel.<br><br></div>I had considered this as I found many discussions about it online.<br><div>><br>>See if there's a way to make 1500 the MTU that you use, or you might have<br>>to look into somehow making whatever is doing openvpn clamp the MSS of the<br>>route so that hopefully things will work better.<br>><br><br>I tried setting mssfix at different values in the client and server configs with no change.<br><br>>if possible, try doing some packet captures on the server to see what size<br>>the packets are, it's possible that you might actually have to change the<br>>MTU of your server TUN interface to be smaller than that of the VPN tunnel.<br>><br></div><div>I did do some packet captures and the problem does happen after a long packet. I changed the MTU of the TUN interface with no change.<br></div><div><br>>If none of this works, then you might need to triple check that nothing is<br>>firewalling the tunnel interface on your server.<br>><br></div><div>The firewall and openvpn are being done on a RHEL6 box. I do not see any firewall that would selectively affect these packets and the packets do get seen by both sides. I don't really have a good enough grasp of the issue to recognize the problem though.<br></div><div><br>>Hope this helps,<br>><br>>Mike<br><br></div><div>Thanks for the suggestions,<br><br></div><div>Mark<br><br></div><div><br></div></div>