<div dir="ltr">Seems that the driver doesn't seem to load - or that's what I am getting when I look in the dmesg. <br><br><div class="gmail_quote"><div dir="ltr">On Fri, Apr 13, 2018 at 11:14 AM Stephen Worthington <<a href="mailto:stephen_agent@jsw.gen.nz">stephen_agent@jsw.gen.nz</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><br>
>> When you get messages like the ones you are getting such as "disagrees<br>
>> about version of symbol snd_ctl_add" and then "Unknown symbol<br>
>> snd_ctl_add", it normally means that your drivers are not compatible<br>
>> with your kernel version and need to be recompiled for the current<br>
>> kernel.  The symbol table for that symbol now says it has a different<br>
>> size or format in the kernel from what your driver file has in its<br>
>> symbol table.  Since the drivers for your card are supposed to be<br>
>> built into the kernel, that should not be happening.<br>
>><br></blockquote><div><br></div><div>How do I "recompile" or add the drivers again to make sure that isn't the problem?</div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
><br>
>Is this maybe because the antenna wasn't connected at the time? Or should<br>
>the driviers showing up regardless?<br>
<br>
No, the drivers should load without any aerial connected.<br>
<br>
But - the Avermedia AVerTVHD card is the one with the saa7134 chip, so<br>
the problem is with the drivers for that card.  Which is not the tuner<br>
you are trying to use in MythTV.  The ATSC tuner, Air2PC v2, does not<br>
use that driver, and should therefore not be affected by the problem<br>
with the saa7134 driver.  If the AVerTVHD tuner was working, I would<br>
expect that you would have two tuners showing up as /dev/dvb/adapter0<br>
and /dev/dvb/adapter1.<br>
<br></blockquote><div>Here's what I find:</div><div><br></div><div><div>ls /dev/dvb/adapter0/</div><div>demux0  dvr0  frontend0  net0</div></div><div><br></div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
I do have to wonder what on Earth someone in North America is doing<br>
with a DVB-T tuner that can not receive the TV in that part of the<br>
world.  Maybe it is the tuner that has a decent remote control?  The<br>
remote is not tied to the tuner - they are separate devices and the<br>
remote probably works even though the AVerTVHD tuner driver is not<br>
loading.  Although I would have thought that the PVR-150 tuner would<br>
have the best remote, if it was the model that came with one.  My<br>
PVR-500 (dual PVR-150) came with the excellent remote I am still using<br>
even though the PVR-500 itself is long retired.<br>
<br>
>><br>
>> However, it is possible that those messages are referring to a<br>
>> different device, as you did not post enough of your logs to be able<br>
>> to tell.  It might be a good idea to post the entire section of the<br>
>> logs from start of bootup until the system is running.  Put it on<br>
>> <a href="http://pastebin.com" rel="noreferrer" target="_blank">pastebin.com</a> and post a link.<br>
>><br></blockquote><div><br></div><div>here's the link to the dmesg </div><div><br></div><div><a href="https://pastebin.com/eVrg1Hh1">https://pastebin.com/eVrg1Hh1</a><br></div><div><br></div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
>> Is it possible you have other DVB devices in that PC?  The name<br>
>> "Air2PC v2" does not match an AverMedia card.  That name appears to be<br>
>> for a TecniSat ATSC USB tuner for the US market:<br>
>><br>
>> <a href="https://www.linuxtv.org/wiki/index.php/TechniSat_Air2PC-ATSC-USB" rel="noreferrer" target="_blank">https://www.linuxtv.org/wiki/index.php/TechniSat_Air2PC-ATSC-USB</a><br>
>><br>
>> What does this command show:<br>
>><br>
>> ls -al /dev/dvb<br>
>><br>
><br>
>ls -al /dev/dvb<br>
>total 0<br>
>drwxr-xr-x  3 root root   60 Mar 29 04:37 .<br>
>drwxr-xr-x 23 root root 4140 Apr  9 20:01 ..<br>
>drwxr-xr-x  2 root root  120 Mar 29 04:37 adapter0<br>
><br>
><br>
>><br>
>> So where are you - are you trying to receive DVB-T signals (eg UK,<br>
>> Europe, Australia, New Zealand) or are you trying to receive ATSC<br>
>> (USA)?<br>
>> ___________<br>
><br>
><br>
>I am in US - Chicago area.<br>
<br>
I am going to make a wild guess here, as to what your real problem is.<br>
I think that you have your aerial connected to the one of the PCI<br>
cards in your PC.  You have two that have aerial connectors, the<br>
PVR-500 and the AVerTVHD.  Neither of which is the correct tuner to<br>
have the aerial cable on.  The ATSC tuner, the only one that will now<br>
work for you, is a USB tuner.  So it will be on the end of a USB cable<br>
plugged into one of the PC's USB ports, which might even be on the<br>
front of the PC instead of the back.  It is also possible that it is<br>
draped somewhere inside the PC with its USB connected to a header on<br>
the motherboard internally.  So you need to find it and plug the<br>
aerial into it.<br></blockquote><div><br></div><div>The antenna is connected to AverMedia card - i confirmed that. </div><div><br></div><div>I haven't used the TV side of myth in over 5 years - maybe more. So I am not sure when I used the cards last. But when I did - I know i had my cable plugged in and it used to work fine. </div><div><br></div><div>As it stands, currently, NOTHING is plugged in to the PVR-150 and my HD indoor antenna plugged into the AverMedia card.</div><div><br></div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><br></blockquote></div></div>