<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></head><body>
<div>I've been working to setup 0.29 due to my old install no longer working. I'd been using data direct for several years after the last xmltv support e00nded. </div><div><br></div><div>I have a fairly unconventional setup i believe, I am using Dish network for most of my HD feeds, and also have a local cable feed that supplies local HD channels along with SD channels on the same line. </div><div><br></div><div>The dish is attached to an HD-PVR and has it's own schedules direct lineup.</div><div><br></div><div>The local cable i had to separate into HD and SD lineups, edited manually in mythtv-setup in past. </div><div><br></div><div>I feed both of those lineups into 4 cards, 2 PVR-250's and 2 PCTV 800i hybrid cards. Those can do HD and SD both. </div><div><br></div><div>This worked great on my 0.27 setup. Now with 0.29 i can't get it to stop adding all the HD/SD channels to the dish lineup every time i run mythfilldatabase. I spent a couple hours last night manually editing the dish lineup only to have it all return back when i ran mythfilldatabase. I then spent a while setting up mythweb to be able to edit channels easier and found i couldn't edit channels out manually. So now i have duplicate channel entries in all my feeds. </div><div><br></div><div>Any suggestions for what the problem is, and maybe a better way to edit channels and sources ? In the past i had used a web based mysql editor, webmin? maybe? Been a while though.</div><div><br></div><div>Any ideas? I do normally use the switch like this:</div><div>mythfilldatabase --remove-new-channels</div><div><br></div><div>Initial setup is probably my issue. Should i try moving to the JSON setup or stick with DD? I'm confused on that one too.</div><div><br></div><div><br></div><div><br></div><div id="composer_signature"><div style="font-size:88%;color:#364f67" dir="auto">Sent from my T-Mobile 4G LTE Device</div></div></body></html>