<div dir="ltr"><div class="gmail_quote"><div dir="ltr">On Tue, Feb 14, 2017 at 9:31 PM Stephen Worthington <<a href="mailto:stephen_agent@jsw.gen.nz">stephen_agent@jsw.gen.nz</a>> wrote:<br class="gmail_msg"></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Some DVB-T channels here in New Zealand have a much longer tuning time<br class="gmail_msg">
than others.  When I upgraded to 0.28, I had to adjust all my DVB-T<br class="gmail_msg">
tuners to use 10000 for the capturecard.channel_timeout field in order<br class="gmail_msg">
to get our TV3 channel to tune properly.  The default is only 3000.<br class="gmail_msg">
There seems to have been a change between 0.27 and 0.28 that makes the<br class="gmail_msg">
right setting for channel_timeout much more important.  Previously, it<br class="gmail_msg">
would tune TV3 OK, but it seems to have done that by timing out and<br class="gmail_msg">
re-trying.  Now, if it times out, it seems it will fail to tune.  To<br class="gmail_msg">
adjust the channel_timeout settings, run mythtv-setup and select<br class="gmail_msg">
"Capture cards".  For each of the DVB-T(2) cards, on the first screen,<br class="gmail_msg">
change the "Tuning timeout (ms)" setting.<br class="gmail_msg"></blockquote><div><br></div><div>Thanks for this.  This is similar to my recent US OTA ATSC exprience with an HDHomeRun Connect.  6000ms wasn't enough timeout, but 10000ms seems to be working (so far). <br></div></div></div>