<div dir="ltr"><div><div><div><div><div>Ok.  Update.  It apparently finally got the mythbackend setup accessed via the ip6 local loopback address.  I was able to re-set the IP address to the new "permanent" address, so things are working.<br><br></div>Now, can anyone tell me what settings should be on the DHCP service on my openwrt router?  I changed it so it now starts the IP lease range from offset 100 (I think that means the lowest leased IP is 192.168.1.101?) with a limit of 150 (which I think means IPs from 192.168.1.101 to 192.168.1.250 can be leased?) This, along with reconfirming that I have defined a static lease for the correct IP and MAC addresses of my backend should keep my backend on the correct IP.<br><br></div>I thought in the past I had set the dynamic lease range so that it excluded the range where I had the static leases defined for the myth FEs and BE, but that could have just worked due to a quirk in the old router, so...<br><br></div>Am I now describing an appropriate configuration, or do I need to change something?<br><br></div>Thanks in advance for any help.<br><br>--<br></div>Craig.<br></div>