<div dir="ltr"><div class="gmail_extra"><div class="gmail_quote">On 5 June 2016 at 22:08, John Pilkington <span dir="ltr"><<a href="mailto:J.Pilk@tesco.net" target="_blank">J.Pilk@tesco.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div class=""><div class="h5"></div></div>
I've no experience with that card, but have you set it up as two devices in mythtv-setup (adapter0, adapter1) -  and then defined the number of virtual tuners for each; default 2, max 5?<br></blockquote></div><br></div><div class="gmail_extra"></div><div class="gmail_extra">Yes I am all setup in mythtvsetup and I have adapter0 and adapter1 (and corresponding /dev/dvb/adapter/0,1).  DVBSky 952v3<br><br>I left everything default (e.g. 2 virtual tuners) apart from setting both tuners to use LNB.<br><br></div><div class="gmail_extra">The kernel should have support for this card but I am wondering if it is broken as you can tune the 2nd (adapter1) tuner in mythtvsetup but at some point MythTV decides it no longer can see it and even mythtvsetup can't access adapter1 but it is still visible in /dev/dvb/adapter1/demux0, dvr0, frontend0 and net0 even after a restart of the PC.  I have tried swapping the "aerial" cables and still adapter0 works and adapter1 doesn't - so not an "aerial" problem.  Tuner 1 (adapter0) seems to be rock solid.<br><br></div><div class="gmail_extra">Any pointers on what I could try next would be great.<br><br></div><div class="gmail_extra">Thanks<br></div></div>