<div dir="ltr">Hello all,<div><br></div><div>I'd been a long time user of MythTV with my first HVR-2250 capture card and so about a year ago I decided to get another capture card for a new system. When I did I got the HVR-2255, and after requesting support from Hauppauge to get it running under Linux, they provided me with patches and some instructions that got it working under the 3.16 kernel that I had to custom compile.</div><div><br></div><div>Because that system is no longer supported and it was becoming a hassle to get packages, I decided to upgrade to the new 16.04 release.</div><div><br></div><div>I had read that the kernel patches were required in 3.16 but that as of either 4.2 or 4.4 the correct modules / firmware / whatever for the HVR-2255 were built in, so I decided to take the plunge....</div><div><br></div><div>I got the upgrades done and solved a few of the issues (getting mysql updated properly was a challenge), but it seems to be working now. </div><div><br></div><div>However, MythTV is not working with this capture card. </div><div><br></div><div>Mythtv-setup reports "Could not get card info for card /dev/dvb/adapter0/frontend0" and "Unknown error" on my capture card page.</div><div><br></div><div>The syslog reports that the firmware is uploading to the card properly and that the device is being registered by the system, so I am not sure what's going wrong.  </div><div><br></div><div>This all was working in MythTV 0.27, but the move to 16.04 upgraded me to 0.28 so it's a different version of MythTV, but since the kernel and entire system has changed as well, I am not sure how to go about fixing this problem. </div><div><br></div><div>Has anyone else got this card and running it under 16.04 and MythTV 0.28?</div><div><br></div><div>Any advice?</div><div><br></div><div>Thanks!</div><div><br></div><div><div><div class="gmail_signature">-- George</div></div>
</div></div>