<div dir="ltr"><div class="gmail_extra"><div class="gmail_quote">On Wed, Feb 3, 2016 at 2:29 PM, David Parker <span dir="ltr"><<a href="mailto:parker.david.a@gmail.com" target="_blank">parker.david.a@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Hello,<div><br></div><div>I mentioned this issue in a different thread but it's off-topic for that conversation, so I wanted to start a new thread for this issue.</div><div><br></div><div>I have a Hauppauge 2255 capture card with dual HD tuners and dual analog tuners, using the saa7164 driver on Debian Linux 8 (64-bit).  The output from dmesg shows the two HD tuners as /dev/dvb/adapter0/frontend0 and /dev/dvb/adapter1/frontend0.  I have both of these tuners configured in MythTV and they work.  However, when I attempt to exit mythtv-setup, it shows the following error on the screen:</div><div><br></div><div>    Card 5 (type DVBInput) is set to start on channel Please add, which does not exist.</div><div><div>    Card 6 (type DVBInput) is set to start on channel Please add, which does not exist.</div></div><div>    Do you want to go back and fix these problems?</div></div></blockquote><div><br></div><div>Never mind!  It turns out these tuners are both on /dev/dvb/adapter1/frontend0 and I had not selected a starting channel for that adapter when I set it up.  Actually I did, but apparently it either defaulted back to being unset, or I unset it by accident, when I edited that input later.</div><div><br></div><div>So this was my bad.  Sorry!</div></div></div></div>