<div dir="ltr">Hello,<div><br></div><div>I mentioned this issue in a different thread but it's off-topic for that conversation, so I wanted to start a new thread for this issue.</div><div><br></div><div>I have a Hauppauge 2255 capture card with dual HD tuners and dual analog tuners, using the saa7164 driver on Debian Linux 8 (64-bit).  The output from dmesg shows the two HD tuners as /dev/dvb/adapter0/frontend0 and /dev/dvb/adapter1/frontend0.  I have both of these tuners configured in MythTV and they work.  However, when I attempt to exit mythtv-setup, it shows the following error on the screen:</div><div><br></div><div>    Card 5 (type DVBInput) is set to start on channel Please add, which does not exist.</div><div><div>    Card 6 (type DVBInput) is set to start on channel Please add, which does not exist.</div></div><div>    Do you want to go back and fix these problems?</div><div><br></div><div>The options are "Yes please" and "No, I know what I am doing".  I am forced to choose "No..." each time, as there is no way to add these tuners.  This does not seem to cause any serious problems, but I then get these messages in the backend log each time it start up:</div><div><br></div><div><div>2016-02-03 13:31:54.102854 E [7357/7357] CoreContext channelutil.cpp:1940 (GetChannelData) - GetChannelData() failed because it could not</div><div>                        find channel number 'Please add' in DB for source '1'.</div><div>2016-02-03 13:31:54.102897 E [7357/7357] CoreContext recorders/dtvchannel.cpp:241 (SetChannelByString) - DTVChan[5](/dev/dvb/adapter1/frontend0): SetChannelByString(Please add): Unable to find channel in database.</div><div>2016-02-03 13:31:54.676544 W [7357/7357] CoreContext recorders/channelbase.cpp:171 (Init) - ChannelBase[5]: Setting start channel 'Please add' failed,</div><div>                        selected to 'Please add' on input 'DVBInput' instead.</div><div>2016-02-03 13:31:54.706157 E [7357/7357] CoreContext channelutil.cpp:1940 (GetChannelData) - GetChannelData() failed because it could not</div><div>                        find channel number 'Please add' in DB for source '1'.</div><div>2016-02-03 13:31:54.706179 E [7357/7357] CoreContext recorders/dtvchannel.cpp:241 (SetChannelByString) - DTVChan[6](/dev/dvb/adapter1/frontend0): SetChannelByString(Please add): Unable to find channel in database.</div><div>2016-02-03 13:31:54.826343 W [7357/7357] CoreContext recorders/channelbase.cpp:171 (Init) - ChannelBase[6]: Setting start channel 'Please add' failed,</div><div>                        selected to 'Please add' on input 'DVBInput' instead.</div></div><div><br></div><div>Is there a way to either configure these tuners, or have MythTV and mythtv-setup ignore them completely?</div><div><br></div><div>Any advice is greatly appreciated.</div><div><br></div><div>    Thanks,</div><div>    Dave</div></div>