<div dir="ltr">Hello,<div><br></div><div>I've run into a new issue on my newest MythTV box.  This is on Debian Linux 8 (64-bit), with MythTV compiled using the default options.  The PC has a DisplayPort output capable of audio, but ALSA doesn't seem to see it.  So I've been trying to fall back to the analog audio output (like I used to use with my old PVR-350 setup), but I can't get that to work either.</div><div><br></div><div>Alsa shows the following devices:</div><div><br></div><div><div># aplay -L</div><div>null</div><div>    Discard all samples (playback) or generate zero samples (capture)</div><div>pulse</div><div>    PulseAudio Sound Server</div><div>equal</div><div>default:CARD=SB</div><div>    HDA ATI SB, ALC662 rev1 Analog</div><div>    Default Audio Device</div><div>sysdefault:CARD=SB</div><div>    HDA ATI SB, ALC662 rev1 Analog</div><div>    Default Audio Device</div><div>front:CARD=SB,DEV=0</div><div>    HDA ATI SB, ALC662 rev1 Analog</div><div>    Front speakers</div><div>surround21:CARD=SB,DEV=0</div><div>    HDA ATI SB, ALC662 rev1 Analog</div><div>    2.1 Surround output to Front and Subwoofer speakers</div><div>surround40:CARD=SB,DEV=0</div><div>    HDA ATI SB, ALC662 rev1 Analog</div><div>    4.0 Surround output to Front and Rear speakers</div><div>surround41:CARD=SB,DEV=0</div><div>    HDA ATI SB, ALC662 rev1 Analog</div><div>    4.1 Surround output to Front, Rear and Subwoofer speakers</div><div>surround50:CARD=SB,DEV=0</div><div>    HDA ATI SB, ALC662 rev1 Analog</div><div>    5.0 Surround output to Front, Center and Rear speakers</div><div>surround51:CARD=SB,DEV=0</div><div>    HDA ATI SB, ALC662 rev1 Analog</div><div>    5.1 Surround output to Front, Center, Rear and Subwoofer speakers</div><div>surround71:CARD=SB,DEV=0</div><div>    HDA ATI SB, ALC662 rev1 Analog</div><div>    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers</div><div>dmix:CARD=SB,DEV=0</div><div>    HDA ATI SB, ALC662 rev1 Analog</div><div>    Direct sample mixing device</div><div>dsnoop:CARD=SB,DEV=0</div><div>    HDA ATI SB, ALC662 rev1 Analog</div><div>    Direct sample snooping device</div><div>hw:CARD=SB,DEV=0</div><div>    HDA ATI SB, ALC662 rev1 Analog</div><div>    Direct hardware device without any conversions</div><div>plughw:CARD=SB,DEV=0</div><div>    HDA ATI SB, ALC662 rev1 Analog</div><div>    Hardware device with all software conversions</div><div><br></div></div><div>The headphone/speaker output of the PC is connected to the audio input of the TV.  When I use speaker-test, I get test sounds from the TV speakers.  However, no matter what I enter as the audio output in MythTV (Setup > Audio) I get an error saying the specified output "is invalid and can not be used."  I have tried:</div><div><br></div><div>ALSA:default</div><div>ALSA:front</div><div>ALSA:default:CARD=SB</div><div>ALSA:default:CARD=SB,DEV=0<br></div><div>ALSA:front:CARD=SB<br></div><div>ALSA:front:CARD=SB,DEV=0<br></div><div><br></div><div>No matter what I do, MythTV says the specified output is invalid.  But speaker-test shows that ALSA does indeed work.  Any help would be greatly appreciated.</div><div><br></div><div>Also, any thoughts on the DisplayPort issue would be greatly appreciated, too, although it's not too important if I can get the analog output working.</div><div><br></div><div>    Thanks!</div><div>    Dave</div></div>