<div dir="ltr"><div class="gmail_extra"><div class="gmail_quote">On Tue, Jan 12, 2016 at 12:10 AM, Ken Smith <span dir="ltr"><<a href="mailto:kens@kensnet.org" target="_blank">kens@kensnet.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Hika van den Hoven wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">

Tuesday, January 12, 2016, 12:09:35 AM, you wrote:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Hika van den Hoven wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
Monday, January 11, 2016, 10:47:08 PM, you wrote:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Hi Myth people<br>
Please forgive this question about an old system. I have an 0.24 system<br>
on Centos 6 that has a number of DVB cards and a PVR-350 that worked<br>
well in the pre digital era, but I have never configured it on the 0.24<br>
setup.<br>
I wanted to capture the UHF Analog output from a Cable TV box. So I<br>
configured the PVR-350, which is /dev/video4, as an IVTV device, mapped<br>
the inputs and run mythtvsetup and it shows up as capture device 18.<br>
I've manually entered a channel number and a frequency but I get errors<br>
like:-<br>
2016-01-09 19:23:52.619 Channel(/dev/video4) Error:<br>
GetCurrentChannelNum(801): Failed to find Channel<br>
2016-01-09 19:23:52.637 Channel(/dev/video4)::TuneTo(801): Error, failed<br>
to find channel.<br>
If I tune the PVR-350 to the right channel with v4l2-ctl and run ffplay<br>
/dev/video4 I get the output I'd expect so the PVR-350 is working.<br>
I must have missed some setting somewhere - but what?<br>
</blockquote>
<br>
Which connection did you use in Input connections?<br>
Depending on how you connected it, you have to use S-Video 1 or<br>
Composite 1 NOT Tuner 1, if the cable box does the tuning!<br>
<br>
</blockquote>
Its the Tuner input I'm using as the signal from the Cable box is PAL-I<br>
on UHF at 735.25 Mhz. Even if my tuning was wrong I'd expect to see snow<br>
from the Tuner input but I get a black screen.<br>
</blockquote>
So you connected the cable box through the coax connection?<br>
<br>
<br>
</blockquote>
Yes - coax RF connection. :-) Ken<br>
<br>
Is there a way to increase the logging of Myth's interaction with the capture cards so that I can get a clue as to what's happening? Initially I used Myth to tune the card to 735.25 Mhz by selecting what I believe I've configured as Ch 801 in live TV mode. In live TV mode I got a black screen. But when I grabbed the output of the card with ffplay I got snow. If Myth had tuned the card I would have expected it to have been left tuned on 735.25 MHz but only when I used v4l2-ctl to do the tuning did the cable box's video appear through ffplay. I suspect that either Myth is not commanding the card or Myth is making the wrong settings on the card. When I look in Live TV mode I get a black screen and the error noted above. If Myth was reading /dev/video4 I'd at least expect to see a snow picture even if the tuning was wrong.<br>
<br>
Any thoughts??<br>
<br>
Thanks<span class="HOEnZb"><font color="#888888"><br>
<br>
Ken</font></span></blockquote><div><br></div><div>It looks like that frequency corresponds with PAL-I channel 54. I'm not sure how you're entering the channel frequency, but have you tried setting up the tuner with a PAL frequency table and presetting the channel to 54 (in mythtv-setup)?<br><br></div><div>Karl<br></div></div></div></div>