<div dir="ltr"><div class="gmail_extra"><div class="gmail_quote">On Mon, Sep 14, 2015 at 5:53 AM, Dan Wilga <span dir="ltr"><<a href="mailto:mythtv-users2@dwilga-linux1.amherst.edu" target="_blank">mythtv-users2@dwilga-linux1.amherst.edu</a>></span> wrote:<br></div><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">That makes me think it's either the power supply, as you suspect, or the USB port on the computer. I'd suggest you try using a completely separate USB port (preferably on a different bus) before spending money to replace the power supply.</blockquote><div><br></div><div>While we're on the subject of HD-PVR power supplies, here's way to build a reliable HD-PVR power supply on the cheap (or for free):</div><div><br></div><div>You can use any quality USB "wall wart" (wall adapter) that outputs 5V at at least 1.0 amps (more than 1A is OK, too - the adapter only sends as much current as the HD-PVR needs).  When my HD-PVR power supply died (after also becoming less and less reliable over time), I just found an old USB wall wart and an old USB cable, cut my old HD-PVR's cable in half, cut the USB cable in half, and soldered the 5V and ground lines from the PC-end of the USB cable to the "back of the HD-PVR" end of the PVR's old power supply cable (you have to make sure you use the right USB lines and get the polarity right).</div><div><br></div><div>In my case the adapter was basically free and it's worked fine for years.  Many PC's can supply 1A or more from their USB ports.  As a test, I was able to run the HD-PVR powered from a USB port on my PC (though I switched back to the wall wart because of pre-existing wiring constraints).</div><div><br></div><div>If anyone wants to do this and has questions I'm happy to help.</div><div><br></div><div>-Fred</div></div></div></div>