<div dir="ltr"><div class="gmail_extra">Here is a long-winded summary of my experience.</div><div class="gmail_extra"><br></div><div class="gmail_extra">I have two ECS Liva units that I am using for dedicated MythTV frontends.  I concur with the others that there are some issues with the use of VAAPI on integrated Intel hardware.  As a frame of reference, I do have a high-powered combination frontend / backend computer with Nvidia graphics hooked to a projector screen. </div><div class="gmail_extra"><br></div><div class="gmail_extra">One of my two Liva units is connected to a 46" 1920x1080 Samsung television and is used for watching recordings and live TV on an Ubuntu 14.10 installation. I run the desktop and MythTV at the native television resolution. After experimenting, I found that I had to set up a playback profile which uses VAAPI/Opengl-Vaapi along with Bob 2X deinterlacing for 1080i content.  For 720p content, I have the deinterlacer set specifically to none.  This seems to work well for both 1080i content and for 720p content without frame drops as long as I ensure that VAAPI is in use. Due to the known bug ( #12319) that causes VAAPI decoding to disable every other channel change, I have had to convinced the family to re-tune the same channel if observing performance issues when channel surfing on liveTV.  <br></div><div class="gmail_extra"><br></div><div class="gmail_extra">My second Liva unit, which was set up by mirroring the drive from the first unit, brought some different challenges. It is connected to a 24" 1366x768 Samsung TV. I initially tried to run playback in the native TV resolution but had repeated issues with varying audio / video sync on 720p content.  This was very evident while trying to watch Wimbledon (ESPN) where the audio cue of the tennis ball being hit would drift way ahead of the video being displayed.  Despite trying various combinations of video playback profiles, adjustment to the playback audio delay, and selection of different audio devices (alsa, pulse etc.), I was unable to reliably address the audio sync issues until I changed the Liva to always output at a 1280x720_60 resolution. Unfortunately, this leads to a small amount of over-scan for the desktop and MythTV user interface but this is much less distracting than the audio sync problems. My guess is that this is indicative of some performance issue when doing output scaling to the native resolution of the television but I am not knowledgeable enough to diagnose further. </div><div class="gmail_extra"><br></div><div class="gmail_extra">On both Liva setups, I also attempted to use separate video modes to force MythTV to output at the resolution of the recording in order to let the television do the resolution scaling.  However, while I would observe the expected change in output resolution on the television, the video output from MythTV resulted in the top edge of the displayed video frame shifted down to start at roughly the horizontal center-line of the television screen. The top half of the television screen would then be black and you'd only see half of the image of the video being displayed.</div><div class="gmail_extra"><br></div><div class="gmail_extra">With the exception the aforementioned LiveTV Vaapi bug, I am mostly pleased with these devices as MythTV frontends. I have been able to turn in my digital cable boxes and reduce my cable bill by enough to break even on the cost of the Liva units in just under a year. </div><div class="gmail_extra"><br></div><div class="gmail_extra">Tim</div></div>