<div dir="ltr"><div class="gmail_extra"><div class="gmail_quote">On Tue, May 12, 2015 at 5:30 PM, Fred Hamilton <span dir="ltr"><<a href="mailto:fred@yonkitime.com" target="_blank">fred@yonkitime.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">My HD-PVR was working reliably (except for an occasional small encoding glitch) for the last year or so until a few weeks ago, when I started getting occasional and then consistent 0 byte recordings.  I tried various power cycling and rebooting combinations and finally it came up working consistently for about a week.  Then I got a new HD-PVR (in the hopes it would fix the encding glitch), so I powered down the system and installed it.<div><br></div><div>Since then I have had nothing but 0 byte recordings.  With the old HD-PVR, with the new one, in different USB ports, cycling power with HD-PVR on first, then Myth box on first, etc.  Always 0 byte recordings.</div><div><br></div><div>However "cat /dev/video0 > temp.ts" always works (if it's run before MythBackend tries to record something.  After Mythbackend tries and fails, "cat /dev/video0 > temp.ts" starts producing zero byte recordings as well.  So it seems like the hardware and driver are OK until mythbackend tries to use it.</div><div><br></div><div>Any suggestions for what to try next?  Surprisingly nothing shows up in the myth log files (except for commercial detection, preview image, metadata, etc. failing).  The first time mythbackend.log updates is when I kill the recording 5 minutes after it starts, and there's nothing about the video failing that I can see.  Are there log files for dev/video1 somewhere?</div><div><br></div><div>Any help/suggestions appreciated!</div></div><br></blockquote><div>When you tried the new unit, did you use its power supply or did you continue to use the old one? I believe that is the most common failure point for these devices.<br><br></div><div>Karl<br></div></div></div></div>