<div dir="ltr"><div>Thanks for the feedback Hika and George!  In the end, I ran out of time and had to revert for now.<br><br>My confusion started setting in when I consulted the IguanaWorks website and the advice was that if the iguanair module was loaded with the system automatically, then just use the default /etc/lirc/hardware.conf, but MythBuntu had already modified it, so I wasn't sure if the file /etc/lirc/hardware.conf.{something -- old? backup? original?} constituted the "default".  It looks like George answered that and I'll test it out in a test environment before I try to do the switchover again.<br><br>Also, I was clueless (until Hika addressed it) what the new device was that replaced (in my case with the iguanaIR) /dev/iguanaIR/0.<br><br>While no one addressed my concern regarding key code <---> action pair definitions in the new scheme, I have since had time to think about it and believe this resource will help: Alec Leamas' HOWTO at <a href="https://github.com/leamas/lirc-docs">https://github.com/leamas/lirc-docs</a>.  From a quick look at it, I may just want to try and see if "it just works" or if I need to do any tweaking.<br><br>--<br></div>Craig.<br></div>