<div dir="ltr"><div>Hello,</div><div><br></div><div>(I also posted this in the MythTV forums, so please forgive the double-posting if you already saw it).</div><div><br></div><div>I have a MythTV box with a Hauppauge PVR-350 and I'm using the IR sensor and remote control for that card. I recently upgraded my MythTV box from Debian 6 to Debian 7, and upgraded from MythTV 0.24 to 0.27 (due to the Schedules Direct server change). This broke the version of LIRC I was running, which I had compiled against the 2.6 kernel on Debian 6 and which would not compile against the 3.2 kernel under Debain 7. So, I installed the lirc and lirc-x packages via apt-get, and after a fair amount of struggling, I was able to get the remote partially working again. The arrow keys work fine in MythTV, but the other buttons (OK, Back/Exit, Power, Play, Pause, etc.) do not.</div><div><br></div><div>Using "ir-keytable" I can see that the button presses are being received and the scancodes match those listed in /etc/lirc/lircd.conf. I have already done the following but I still haven't solved this issue:</div><div><br></div><div>1. Generated a new /etc/lirc/lircd.conf file using irrecord</div><div>2. Made the key names in /etc/lirc/lircd.conf match those found in /lib/udev/rc_keymaps/hauppauge</div><div>3. Made the key names in /etc/lirc/lircrc match those found in /lib/udev/rc_keymaps/hauppauge</div><div><br></div><div>I have attached my hardware.conf, lircd.conf, and lircrc files for reference (the files end in .txt just to make them valid for uploading to the forum). Any idea why only the arrow keys work in MythTV after the upgrade? Any help would be greatly appreciated!<br></div><div><br></div><div>I'm using lircd 0.9.0-pre1 from the stock Debian packages (32-bit).</div><div><br></div><div>Thanks!</div></div>