<div dir="ltr"><div><div>For the sake of completeness, I did manage to get this tuner working, but I'm not exactly sure how. I just dropped all tuners from MythTV-setup and readded them. I am not sure why the firewire_tester tool did not work.<br>
<br></div>Interestingly, Shaw Cable has modified this box (DCX-3510) so that if you enter the channel number via a remote control for an SD channel it will tune the corresponding HD channel. So, in my area, ABC Seattle SD is channel 2, and ABC Seattle HD is channel 200. If you enter 200 via the remote, the box will do nothing (as if the channel does not exist). If you enter channel 2, you will see ABC Seattle HD. Unfortunately this is not implemented across all of Shaw's boxes, the older DCT-6200, will show SD on 2 and HD on 200.<br>
<br></div>This conflicts with the SchedulesDirect listings, as it (correctly) indicates ABC Seattle HD is on channel 200. However, as it turns out, when MythTV sends out channel 200 via firewire, the DCX-3510 box does display ABC Seattle HD (although channel 2 is shown on the front panel and in the guide). <br>
<br>So basically essentially the Shaw DCX-3510 behaves differently if you use the remote vs using the firewire to change channels.<br><div><br><br></div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Fri, Aug 2, 2013 at 4:41 PM, Kane Tse <span dir="ltr"><<a href="mailto:kane.tse@gmail.com" target="_blank">kane.tse@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Just switched back to Shaw. My trusty old DCT-6200 is working fine with MythTV and firewire capture, but I can't seem to get any response from the DCX-3510-M. Does anyone have firewire capture from this box working?<br>
</div>
</blockquote></div><br></div>