Update: Moving the powerline adapter off of the powerstrip to a standard wall jack did the trick. Hadn't thought of it, but essentially, the powerstrip (with surge protection) acts as a low-pass filter and that is definitely bad for ethernet traffic.<br>
<br>Also, remembered the "other" thing that had been part of my problem with this particular frontend. The particular powerline adapter set I'm using has a "power-saving" feature that shuts down the link if there's no one talking to it on both ends. Thus, with the frontend shutdown, there's no way to wake it because the link is down until the PC is awake. Duh! I fixed this by putting an ethernet switch on that end between the powerline adapter and the PC since the switch uses less power than the powered up PC would.<br>
<br>Craig.<br><div class="gmail_extra"><br><br><div class="gmail_quote">On Wed, Dec 5, 2012 at 7:36 PM, Craig Huff <span dir="ltr"><<a href="mailto:huffcslists@gmail.com" target="_blank">huffcslists@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Ah! Much food for thought. One of the adapters is indeed plugged in to a powerstrip. And I understand the point (and process) for just using the powerline connection for just WOL. I couldn't remember the term "bonding" and had never had a reason to dig into finding out how it works or what was involved in setting it up. May not care, either, now that I have your suggestions to investigate, since they may solve my issues. Many thanks.<span class="HOEnZb"><font color="#888888"><br>
<br>Craig.</font></span><div class="HOEnZb"><div class="h5"><br><div class="gmail_extra"><br><br><div class="gmail_quote">On Wed, Dec 5, 2012 at 7:14 PM, Michael Watson <span dir="ltr"><<a href="mailto:michael@thewatsonfamily.id.au" target="_blank">michael@thewatsonfamily.id.au</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div>On 6/12/2012 10:24 AM, Craig Huff wrote:<br>
<blockquote class="gmail_quote" style="margin:0pt 0pt 0pt 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
I have a Frontend (FE) that I can't run ethernet cable to.<br>
<br>
I tried WiFi and found that the throughput met my needs, but I couldn't use WOL with WiFi amongst other things.<br>
<br>
I set it up with Powerline Ethernet using a pair of Netgear AV+ 200 adapters. That solved the WOL and other problems, but now the throughput is too low to watch programs.<br>
<br>
Now I'm wondering about whether I can combine the two to get everything working. Do I just put the WiFi adapter back in and let it run, expecting the video data to get there over the shared bandwidth of the WiFi and Powerline interfaces, should I set it up with a second hostname for the second ethernet interface, or is there something else I haven't thought of that would need to be addressed?<br>
<br>
I'll be using DHCP with static IP assignments by MAC address, if that plays into the decision matrix.<br>
<br>
If I should set up a second hostname, I could really use some help with how to go about doing that.<br>
<br>
Craig.<br>
</blockquote>
<br></div></div>
People have said that the powerline adapters give them enough bandwidth, do you have the adapters plugged directly into the outlet, or into a powerboard? Bests results are achieved if the adapters are plugged directly into the outlet.<br>
<br>
If you do need to use the wireless, then simply use the powerline adapter for wol, but dont assign it an ipaddress or allow it to obtain an IP Address via dhcp. Comment out the "auto eth0" and "iface eth0 inet xxxxx" in your "/etc/network/interfaces" will do that. This way, you can use the ethernet adapter connected to the powerline adapter for wol, and wireless for your connectivity<br>
<br>
Another option is bonding the ethernet with the wireless, but I dont think this will guarantee you the bandwidth.<br>
<br>
Regards<br>
Michael<br>
______________________________<u></u>_________________<br>
mythtv-users mailing list<br>
<a href="mailto:mythtv-users@mythtv.org" target="_blank">mythtv-users@mythtv.org</a><br>
<a href="http://www.mythtv.org/mailman/listinfo/mythtv-users" target="_blank">http://www.mythtv.org/mailman/<u></u>listinfo/mythtv-users</a><br>
</blockquote></div><br></div>
</div></div></blockquote></div><br></div>