Hi, I hope someone with similar problem or anyone with an idea drop suggestions. I tried searching result from mythtv mailing lists and various forums but did not turn up anything relevant to my problem.<br> <br>I recently installed a Compro Videomate S350 DVB-S card and I was testing it with Mythtv 0.24 before going on to a full system later in the week, I also have two other older capture devices, one PCI and one USB. I followed the instruction for setting up DVB-S in
this mythtv page:<br> <a href="http://www.mythtv.org/wiki/DVB-S" target="_blank" rel="nofollow">http://www.mythtv.org/wiki/DVB-S</a><br> <br>
Ran mythtv-setup and the first order of sequence I did was:<br>
Capture card -> DiSEqC in the configuration of the capture card
-> "(Unconnected)" -> LNB from the list (switch, rotor, LNB)
-> "Universal (Europe)" <br> <br>The second sequence after removing the previous capture card configuration:<br>
Capture card -> DiSEqC in the configuration of the capture card
-> "(Unconnected)" -> switch -> switch Type - DiSEqC, number
of port 2 -> ESC -> "(Unconnected)" -> LNB from the list
(switch, rotor, LNB) -> "Universal (Europe)" <br> <br>
In both cases used these scan configuration: Freq = 10714000 pol= H symbol rate = 22000000 FEC = 5/6 inversion = Auto and all I got were "Failed to find any channel." pop-up message in Mythtv.<br> <br>As of interest, the Compro Videomate S350 DVB-S card is detected fine on my PC though it is detected as Compro Videomate T750, I loaded this card with "options saa7134 card=169". Earlier I tested this card with Kaffeine - it scanned all channels
and it played fine.. The scans are all listed as "BSkyB" not Freesat
which is what I want. I live in a flat with shared dishes so can only
just plug in the satellite cable in one of the two feeds on wall.<br><br>best regards,<br>zs.<br>