<br><br><div class="gmail_quote">On Wed, Jul 14, 2010 at 9:26 PM, German Pulido <span dir="ltr"><<a href="mailto:gapf2010@gmail.com">gapf2010@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
Hi!<br>
<br>
I am trying to assemble a good MythTV box (will probably use mythdora or mythbuntu). However, I am having issues finding the right hardware for this task. My requirements would be:<br>
<br>
1. Small form factor (something like a mac mini or even a dell zino, but not bigger)<br>
2. Because of 1, I think the TV tuner must be USB.<br>
3. Ability to watch analog TV (my country uses NTSC standard)<br>
4. Ability to watch digital TV (my country chose DVB-T as standard for digital TV, but it's not widespread yet, most channels are analog).<br>
5. IR remote control (supported by lirc). For this I guess any el-cheapo USB remote control would do, right?</blockquote><div><br></div><div><br></div><div>Sounds like you're working mostly with SD material then (NTSC). Just about any modern box will handle that fine. Is the Aspire Revo available in your country? 200USD for a well supported small form factor box. Hard to beat that in the US. A Mac Mini would also work well, even an older model as SD can be decoded reasonably well with a slower CPU. A PPC version might even be OK, but I'm not sure how well the video out is supported on those. Some Mac Minis have onboard IR receivers that work in Linux. I don't know how far back that feature goes though. </div>
<div><br></div><div>Not sure on the tuner, I'm sure others will give options for those. I never really did analog, just ATSC. The HDHomeRun has a DVB-T version I believe, that would be a good choice for that, and it has a well supported IR receiver that will work with about any IR remote control. For analog, look for a model that does MPEG encoding for you, it keeps CPU needs down to a reasonable level. And yes, with a small box like this you will likely need USB for the analog tuner. The HDHR uses ethernet. </div>
<div><br></div><div>Have you considered storage? These small boxes usually run a single laptop type HDD. With the higher seek times you see in those, I'd really recommend putting the OS and recordings on different physical drives. That would mean either install Linux and Myth to a USB device and boot that, or use a USB external HDD for recordings. I've done Linux and Myth on an 8GB USB flash drive, it worked great, and it was cheap. :) If you are doing mostly SD recordings, you might get away with the single HDD. Just pointing it out so you know about possible problems. </div>
</div>