<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.26.3">
</HEAD>
<BODY>
Hello Everyone,<BR>
<BR>
I have just subscribed to the list again. <BR>
<BR>
The other day my remote control quit working. HUmmmm? I have not done any upgrades and have the correct settings<BR>
set in the mythtvfrontend setup for the remote. But going thru my logs I found the following error:<BR>
<BR>
tveeprom 2-0050: Huh, no eeprom present (err=-6)?<BR>
tveeprom 2-0050: Encountered bad packet header [5c]. Corrupt or not a Hauppauge eeprom.<BR>
ivtv1: Invalid EEPROM<BR>
cx25840 2-0044: cx25 0-21 found @ 0x88 (ivtv i2c driver #1)<BR>
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)<BR>
wm8775 2-001b: I2C: cannot write 000 to register R23<BR>
wm8775 2-001b: I2C: cannot write 000 to register R7<BR>
wm8775 2-001b: I2C: cannot write 021 to register R11<BR>
wm8775 2-001b: I2C: cannot write 102 to register R12<BR>
wm8775 2-001b: I2C: cannot write 000 to register R13<BR>
wm8775 2-001b: I2C: cannot write 1d4 to register R14<BR>
wm8775 2-001b: I2C: cannot write 1d4 to register R15<BR>
wm8775 2-001b: I2C: cannot write 1bf to register R16<BR>
wm8775 2-001b: I2C: cannot write 185 to register R17<BR>
wm8775 2-001b: I2C: cannot write 0a2 to register R18<BR>
wm8775 2-001b: I2C: cannot write 005 to register R19<BR>
wm8775 2-001b: I2C: cannot write 07a to register R20<BR>
wm8775 2-001b: I2C: cannot write 102 to register R21<BR>
<BR>
Now, I noticed that no /dev/lirc* at all. Therefore somehow my receiver on the card is borked I guess.<BR>
<BR>
<BR>
I have 2 PVR-150's in a box running Fedora 11. I use one receiver port on one card to do my remote that came with<BR>
one of the pvr150s. <BR>
<BR>
Both cards are working and recording shows with no problems except no remote control.<BR>
<BR>
System information:<BR>
<BR>
Mythtv .22<BR>
<BR>
Linux mythtv.athome.net 2.6.30.10-105.2.23.fc11.x86_64 #1 SMP Thu Feb 11 07:06:34 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux<BR>
<BR>
lirc-0.8.6-2.fc11.x86_64<BR>
<BR>
snippet of logs pertaining to ivtv: (First pvr150 no problems, Second card - Oops)<BR>
<BR>
ivtv0: Initializing card 0<BR>
ivtv0: Autodetected Hauppauge card (cx23416 based)<BR>
ivtv0: Autodetected Hauppauge WinTV PVR-150<BR>
ivtv0: Reopen i2c bus for IR-blaster support<BR>
IRQ 20/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs<BR>
ivtv0: Registered device video0 for encoder MPG (4096 kB)<BR>
ivtv0: Registered device video32 for encoder YUV (2048 kB)<BR>
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)<BR>
ivtv0: Registered device video24 for encoder PCM (320 kB)<BR>
ivtv0: Initialized card: Hauppauge WinTV PVR-150<BR>
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)<BR>
ivtv0: Encoder revision: 0x02060039<BR>
<BR>
<BR>
ivtv1: Initializing card 1<BR>
ivtv1: Autodetected Hauppauge card (cx23416 based)<BR>
ivtv1: Invalid EEPROM<BR>
IRQ 22/ivtv1: IRQF_DISABLED is not guaranteed on shared IRQs<BR>
ivtv1: Registered device video1 for encoder MPG (4096 kB)<BR>
ivtv1: Registered device video33 for encoder YUV (2048 kB)<BR>
ivtv1: Registered device vbi1 for encoder VBI (1024 kB)<BR>
ivtv1: Registered device video25 for encoder PCM (320 kB)<BR>
ivtv1: Registered device radio1 for encoder radio<BR>
ivtv1: Initialized card: Hauppauge WinTV PVR-150<BR>
ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)<BR>
ivtv1: Encoder revision: 0x02060039<BR>
<BR>
Here is some more lovely information:<BR>
ivtv1: Initializing card 1<BR>
ivtv1: Autodetected Hauppauge card (cx23416 based)<BR>
ivtv 0000:04:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22<BR>
tveeprom 2-0050: Huh, no eeprom present (err=-6)?<BR>
tveeprom 2-0050: Encountered bad packet header [5c]. Corrupt or not a Hauppauge eeprom.<BR>
ivtv1: Invalid EEPROM<BR>
cx25840 2-0044: cx25 0-21 found @ 0x88 (ivtv i2c driver #1)<BR>
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)<BR>
wm8775 2-001b: I2C: cannot write 000 to register R23<BR>
wm8775 2-001b: I2C: cannot write 000 to register R7<BR>
wm8775 2-001b: I2C: cannot write 021 to register R11<BR>
wm8775 2-001b: I2C: cannot write 102 to register R12<BR>
wm8775 2-001b: I2C: cannot write 000 to register R13<BR>
wm8775 2-001b: I2C: cannot write 1d4 to register R14<BR>
wm8775 2-001b: I2C: cannot write 1d4 to register R15<BR>
wm8775 2-001b: I2C: cannot write 1bf to register R16<BR>
wm8775 2-001b: I2C: cannot write 185 to register R17<BR>
wm8775 2-001b: I2C: cannot write 0a2 to register R18<BR>
wm8775 2-001b: I2C: cannot write 005 to register R19<BR>
wm8775 2-001b: I2C: cannot write 07a to register R20<BR>
wm8775 2-001b: I2C: cannot write 102 to register R21<BR>
IRQ 22/ivtv1: IRQF_DISABLED is not guaranteed on shared IRQs<BR>
ivtv1: Registered device video1 for encoder MPG (4096 kB)<BR>
ivtv1: Registered device video33 for encoder YUV (2048 kB)<BR>
ivtv1: Registered device vbi1 for encoder VBI (1024 kB)<BR>
ivtv1: Registered device video25 for encoder PCM (320 kB)<BR>
ivtv1: Registered device radio1 for encoder radio<BR>
ivtv1: Initialized card: Hauppauge WinTV PVR-150<BR>
ivtv: End initialization<BR>
<BR>
<BR>
<BR>
-------------------------------------------------<BR>
<BR>
Im thinking right now, Swap the receiver to the other cards port and perhaps back in business? Can I get that lucky? <BR>
<BR>
thanks for any input on this problem,<BR>
<BR>
coffee412<BR>
<BR>
<BR>
</BODY>
</HTML>