<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
<title></title>
</head>
<body text="#000000" bgcolor="#ffffff">
On 04/20/2010 08:16 PM, Douglas Peale wrote:
<blockquote cite="mid:4BCE43F6.1050601@comcast.net" type="cite">
<pre wrap="">-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Dave Day wrote:
</pre>
<blockquote type="cite">
<pre wrap="">I get about 7 local stations but only two of them are always good.
The two good ones are hi-band VHF. Three others are good about 50% of
the time
and two others usually break up during a program.</pre>
</blockquote>
<pre wrap="">First go to TVFool.com and enter your location, see what it says about what you should be able to get and where to point your antenna.
Second, get your antenna outside. There is all kinds of junk in your attic (power wiring, plumbing etc.) that makes it a horrible place for an antenna.
The signal quality indicator on a TV is nearly useless for determining the cause of your problems.
Every TV uses a different method of determining & displaying signal quality, and most are terrible.
With what you have, you can't tell if you signal problems are caused by weak signal, multi-path, or too strong signal.
The information you get from TVFool will give you at least a clue as to the cause.
The best tool I have for aiming antennas is the HDHomeRun Config tool that shows signal strength, signal quality, and symbol quality.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - <a class="moz-txt-link-freetext" href="http://enigmail.mozdev.org">http://enigmail.mozdev.org</a>
iEYEARECAAYFAkvOQ/YACgkQe5tReOauESoARgCcDjiTP0G3K4EX12944XW1iy2k
jMYAn1WMnYw+Rrpao6mG0XNbZhSkRm7s
=CiVV
-----END PGP SIGNATURE-----
_______________________________________________
mythtv-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:mythtv-users@mythtv.org">mythtv-users@mythtv.org</a>
<a class="moz-txt-link-freetext" href="http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users">http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users</a>
</pre>
</blockquote>
<font size="+1">I have mostly solved the problem and thought an update
might be useful to someone.<br>
<br>
The bulk of responses to my original post indicated that a preamp
should be postponed until after optimizing the other antenna system
components, so I held off on that.<br>
<br>
Instead I tried to learn a little about antennas. My original antenna
set up was a medium sized combination uhf/vhf antenna on a rotor in the
attic at about 20 feet in height I'd guess. The UHF portion is a small
corner reflector yagi. The VHF portion looks to be a log periodic type
of antenna. Most of my transmitters are bunched together east of me
about 25 miles away. There are NO outside antennas within miles of me,
so if possible, I wanted this to succeed in the attic. The problem is
we are deep in a forest of very tall pines and hardwoods. Even if I do
have to go outside the attic, I simply can't get above the trees.<br>
<br>
This quote from above sums up my original situation:<br>
</font>
<pre wrap="">I get about 7 local stations but only two of them are always good.
The two good ones are hi-band VHF. Three others are good about 50% of
the time
and two others usually break up during a program.</pre>
<br>
<font size="+1">I ended up building a single bay Gray-Hoverman (one
hour at Home Depot and 3 hours at the work bench). </font>The
particular version I built is considered a UHF only antenna, so my plan
was to first fix my main problem which was the UHF stations, and then I
thought I would build a yagi for the two vhf ones.<br>
Of course when I finished it I was anxious to get a hint of whether it
would help. So I went to the attic and just set the SBGH down on the
attic floor under the rotor/antenna and moved the RG-6 coax to the
balun on the Gray-Hoverman. I pointed the SBGH in the general
direction of my stations and went to check the reception. It was
great! Apparently all the stations are pretty comfortably above the
threshold where lock occurs because the pictures on all 7 stations are
basically perfect. And, ironically, the two VHF stations are as good
or better than they were before, even though the SBGH model I built is
supposed to only be a UHF antenna.<br>
<br>
Later in the day I switched out the original antenna and attached the
Gray-Hoverman to the rotor. Rotating the antenna some didn't seem to
have a big effect on my reception, although I didn't go but 25 degrees
in either direction.<br>
<br>
So, needless to say, the Family Acceptance Factor has shot WAY up!
Those 7 stations give us about 15 channels of programming and all of
pretty much perfect quality, at least so far (Its only been two days).<br>
<br>
But is does lead me to ask two questions. I am using a Hauppauge 1600
with MythTV. Myth does not retrieve signal strength from that card.
It only gives what it calls SNR numbers which are generally between 2.1
and 2.4. I am left wondering if 2.4 is pretty much the best anybody
ever gets from this card or would it be possible to get above 2.4 and
perhaps give us some extra cushion for those rainy/windy days in the
forest when signal quality varies?<br>
<br>
Another interesting little fact is that before this Gray-Hoverman,
when my experience was that an SNR number of 2.1 or less pretty much
meant an unreliable lock and a pretty crappy viewing experience. 2.2
meant a better lock but some break up and pixellation, 2.3 meant we
might get through the whole program with nor problems or we might not,
but the viewing experience would be OK, and 2.4 meant whoohoo! studio
quality!<br>
<br>
But now with the SBGH, I haven't had even the slightest problem even
though the SNR does briefly go down even to 2.1. The pictures have
been solid even down there. I don't really understand that. <br>
<br>
So, I wonder if any of you all who have Hauppauge 1600s get SNRs above
2.4 ???<br>
<br>
And any thoughts on why with the SBGH the signal is good even with what
before were pretty crappy SNR numbers.<br>
</body>
</html>