<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
Hey Guys. <br>
<br>
I'm not sure what this means - But can someone tell me about it?<br>
I haven't set anything specifict about this frequency - And never had
experienced that error before ? But needed to reinstall my whole system
aften an harddisk failure - so did it - and ending up with some tuners
that are working quity OK.<br>
<br>
My setup is like this<br>
ArchLinux x86_64 <br>
MythTV 0.22 - mytpltv,plugins and themes are all downloaded and
compiled on this machine from Mythtv.org<br>
2xHVR4000 installed with s2-liplianin drivers and the tevii firmware! <br>
<br>
/var/log/mythbackend.log:<br>
2009-12-02 09:44:57.707 New DB connection, total: 6<br>
2009-12-02 09:44:57.783 Connected to database 'mythconverg' at host:
172.16.20.10<br>
<font color="#ff0000">2009-12-02 09:45:00.378
DVBChan(2:/dev/dvb/adapter2/frontend0) Warning: Your frequency setting
(12476000) is out of range. (min/max:950000/2150000)<br>
2009-12-02 09:45:08.391 DVBChan(4:/dev/dvb/adapter3/frontend0) Warning:
Your frequency setting (11309000) is out of range.
(min/max:950000/2150000)</font><br>
2009-12-02 09:45:09.763 New DB scheduler connection<br>
2009-12-02 09:45:09.891 Connected to database 'mythconverg'<br>
<br>
But Not sure wheter this make my cards crash from time to time! <br>
But during LiveTV - i've starting to have a lot of lacking, stops ettc
ind the streaming, but not able to see a whole movie - without 80 - 100
small lacks during playback! <br>
<br>
<br>
My load from dmesg looks like this: <br>
Linux video capture interface: v2.00<br>
cx88/0: cx2388x v4l2 driver version 0.0.7 loaded<br>
cx8800 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16<br>
cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000
DVB-S/S2/T/Hybrid [card=68,autodetected], frontend(s): 2<br>
cx88[0]: TV tuner type 63, Radio tuner type -1<br>
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded<br>
cx2388x alsa driver version 0.0.7 loaded<br>
cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner<br>
tuner 1-0043: chip found @ 0x86 (cx88[0])<br>
tda9887 1-0043: creating new instance<br>
tda9887 1-0043: tda988[5/6/7] found<br>
tuner 1-0061: chip found @ 0xc2 (cx88[0])<br>
input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input7<br>
tveeprom 1-0050: Hauppauge model 69009, rev B2D3, serial# 5383531<br>
tveeprom 1-0050: MAC address is 00-0D-FE-52-25-6B<br>
tveeprom 1-0050: tuner model is Philips FMD1216MEX (idx 133, type 78)<br>
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
ATSC/DVB Digital (eeprom 0xf4)<br>
tveeprom 1-0050: audio processor is CX882 (idx 33)<br>
tveeprom 1-0050: decoder processor is CX882 (idx 25)<br>
tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter<br>
cx88[0]: hauppauge eeprom: model=69009<br>
tuner-simple 1-0061: creating new instance<br>
tuner-simple 1-0061: type set to 78 (Philips FMD1216MEX MK3 Hybrid
Tuner)<br>
input: cx88 IR (Hauppauge WinTV-HVR400 as
/devices/pci0000:00/0000:00:1e.0/0000:05:00.0/input/input8<br>
cx88[0]/0: found at 0000:05:00.0, rev: 5, irq: 16, latency: 64, mmio:
0xf1000000<br>
IRQ 16/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs<br>
wm8775 1-001b: chip found @ 0x36 (cx88[0])<br>
cx88[0]/0: registered device video0 [v4l2]<br>
cx88[0]/0: registered device vbi0<br>
cx88[0]/0: registered device radio0<br>
cx88[0]/2: cx2388x 8802 Driver Manager<br>
cx88-mpeg driver manager 0000:05:00.2: PCI INT A -> GSI 16 (level,
low) -> IRQ 16<br>
cx88[0]/2: found at 0000:05:00.2, rev: 5, irq: 16, latency: 64, mmio:
0xf3000000<br>
IRQ 16/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs<br>
cx88_audio 0000:05:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ
16<br>
IRQ 16/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs<br>
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards<br>
cx8800 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16<br>
cx88[1]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000
DVB-S/S2/T/Hybrid [card=68,autodetected], frontend(s): 2<br>
cx88[1]: TV tuner type 63, Radio tuner type -1<br>
cx88[1]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner<br>
tuner 2-0043: chip found @ 0x86 (cx88[1])<br>
tda9887 2-0043: creating new instance<br>
tda9887 2-0043: tda988[5/6/7] found<br>
tuner 2-0061: chip found @ 0xc2 (cx88[1])<br>
tveeprom 2-0050: Hauppauge model 69009, rev B2D3, serial# 3313688<br>
tveeprom 2-0050: MAC address is 00-0D-FE-32-90-18<br>
tveeprom 2-0050: tuner model is Philips FMD1216MEX (idx 133, type 78)<br>
tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
ATSC/DVB Digital (eeprom 0xf4)<br>
tveeprom 2-0050: audio processor is CX882 (idx 33)<br>
tveeprom 2-0050: decoder processor is CX882 (idx 25)<br>
tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter<br>
cx88[1]: hauppauge eeprom: model=69009<br>
tuner-simple 2-0061: creating new instance<br>
tuner-simple 2-0061: type set to 78 (Philips FMD1216MEX MK3 Hybrid
Tuner)<br>
input: cx88 IR (Hauppauge WinTV-HVR400 as
/devices/pci0000:00/0000:00:1e.0/0000:05:04.0/input/input9<br>
cx88[1]/0: found at 0000:05:04.0, rev: 5, irq: 16, latency: 64, mmio:
0xf5000000<br>
IRQ 16/cx88[1]: IRQF_DISABLED is not guaranteed on shared IRQs<br>
wm8775 2-001b: chip found @ 0x36 (cx88[1])<br>
cx88[1]/0: registered device video1 [v4l2]<br>
cx88[1]/0: registered device vbi1<br>
cx88[1]/0: registered device radio1<br>
cx88[1]/2: cx2388x 8802 Driver Manager<br>
cx88-mpeg driver manager 0000:05:04.2: PCI INT A -> GSI 16 (level,
low) -> IRQ 16<br>
cx88[1]/2: found at 0000:05:04.2, rev: 5, irq: 16, latency: 64, mmio:
0xf7000000<br>
IRQ 16/cx88[1]: IRQF_DISABLED is not guaranteed on shared IRQs<br>
cx88_audio 0000:05:04.1: PCI INT A -> GSI 16 (level, low) -> IRQ
16<br>
IRQ 16/cx88[1]: IRQF_DISABLED is not guaranteed on shared IRQs<br>
cx88[1]/1: CX88x/1: ALSA support for cx2388x boards<br>
cx88/2: cx2388x dvb driver version 0.0.7 loaded<br>
cx88/2: registering cx8802 driver, type: dvb access: shared<br>
cx88[0]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000
DVB-S/S2/T/Hybrid [card=68]<br>
cx88[0]/2: cx2388x based DVB/ATSC card<br>
cx8802_alloc_frontends() allocating 2 frontend(s)<br>
tuner-simple 1-0061: attaching existing instance<br>
tuner-simple 1-0061: couldn't set type to 63. Using 78 (Philips
FMD1216MEX MK3 Hybrid Tuner) instead<br>
DVB: registering new adapter (cx88[0])<br>
DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...<br>
DVB: registering adapter 0 frontend 1 (Conexant CX22702 DVB-T)...<br>
cx88[1]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000
DVB-S/S2/T/Hybrid [card=68]<br>
cx88[1]/2: cx2388x based DVB/ATSC card<br>
cx8802_alloc_frontends() allocating 2 frontend(s)<br>
tuner-simple 2-0061: attaching existing instance<br>
tuner-simple 2-0061: couldn't set type to 63. Using 78 (Philips
FMD1216MEX MK3 Hybrid Tuner) instead<br>
DVB: registering new adapter (cx88[1])<br>
DVB: registering adapter 1 frontend 0 (Conexant CX24116/CX24118)...<br>
DVB: registering adapter 1 frontend 1 (Conexant CX22702 DVB-T)...<br>
<br>
Is this the correct way or is there anything wrong with the drivers or
firmware ????<br>
<br>
TIA <br>
Per Jørgensen<br>
</body>
</html>