<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Okay,<br>
<br>
For testing setup Ubuntu 0910 with MyhtTV 0.22.<br>
HVR-4000 properly registered, no problem there.<br>
Entering mythtv-setup selection of correct frontend available, no
problem.<br>
-> Scanning does not work<br>
-> trouble with scanning is also that 'some' country is always
selected, but Belgium is not in the list of course - and this seems to
influence channels being scanned. I tried Austria and France with no
luck.<br>
<br>
When using scan -f 1 -d 1 be-Schoten, channels are properly scanned and
seen:<br>
---------------------------------------------------------------------------------<br>
linuxmce@dcerouter:~$ scan -f 1 -d 1 be-Schoten > erwin.conf<br>
scanning be-Schoten<br>
using '/dev/dvb/adapter0/frontend1' and '/dev/dvb/adapter0/demux1'<br>
initial transponder 506000000 0 2 9 3 1 0 0<br>
>>> tune to:
506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE<br>
0x0000 0x1090: pmt_pid 0x1090 VRT -- Klara continuo (running)<br>
0x0000 0x1080: pmt_pid 0x1080 VRT -- MNM (running)<br>
0x0000 0x1070: pmt_pid 0x1070 VRT -- Studio Brussel (running)<br>
0x0000 0x1060: pmt_pid 0x1060 VRT -- Klara (running)<br>
0x0000 0x1040: pmt_pid 0x1040 VRT -- Radio 1 (running)<br>
0x0000 0x1050: pmt_pid 0x1050 VRT -- Radio 2 (running)<br>
0x0000 0x1010: pmt_pid 0x1010 VRT -- EEN (running)<br>
0x0000 0x1020: pmt_pid 0x1020 VRT -- Canvas/Ketnet (running)<br>
0x0000 0x10b0: pmt_pid 0x10b0 VRT -- Canvas+/Ketnet+ (running)<br>
0x0000 0x10a0: pmt_pid 0x10a0 VRT -- Sporza (running)<br>
0x0000 0x10c0: pmt_pid 0x10c0 VRT -- Nieuws+ (running)<br>
0x0000 0x10d0: pmt_pid 0x10d0 VRT -- MNM hits (running)<br>
Network Name 'VRTmux1'<br>
>>> tune to:
482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE<br>
0x0001 0x1090: pmt_pid 0x1090 VRT -- Klara continuo (running)<br>
0x0001 0x1080: pmt_pid 0x1080 VRT -- MNM (running)<br>
0x0001 0x1070: pmt_pid 0x1070 VRT -- Studio Brussel (running)<br>
0x0001 0x1060: pmt_pid 0x1060 VRT -- Klara (running)<br>
0x0001 0x1040: pmt_pid 0x1040 VRT -- Radio 1 (running)<br>
0x0001 0x1050: pmt_pid 0x1050 VRT -- Radio 2 (running)<br>
0x0001 0x1010: pmt_pid 0x1010 VRT -- EEN (running)<br>
0x0001 0x1020: pmt_pid 0x1020 VRT -- Canvas/Ketnet (running)<br>
0x0001 0x10b0: pmt_pid 0x10b0 VRT -- Canvas+/Ketnet+ (running)<br>
0x0001 0x10a0: pmt_pid 0x10a0 VRT -- Sporza (running)<br>
0x0001 0x10c0: pmt_pid 0x10c0 VRT -- Nieuws+ (running)<br>
0x0001 0x10d0: pmt_pid 0x10d0 VRT -- MNM hits (running)<br>
Network Name 'VRTmux1'<br>
dumping lists (24 services)<br>
Done.<br>
---------------------------------------------------------------------------------------------------<br>
contents of be-Schoten:<br>
# Tournai - Belgique<br>
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy<br>
T 506000000 8MHz 2/3 NONE QAM64 8k 1/32 NONE<br>
----------------------------------------------------------------------------------------------------<br>
I've tried to put together my channels.conf file as follows:<br>
----------------------------------------------------------------------------------------------------<br>
EEN:506000000:QAM_64:4113:4114:4112<br>
Canvas/Ketnet:506000000:QAM_64:4129:4130:4128<br>
Canvas+/Ketnet+:506000000:QAM_64:4273:4274:4272<br>
EEN:482000000:QAM_64:4113:4114:4112<br>
Canvas/Ketnet:482000000:QAM_64:4129:4130:4128<br>
Canvas+/Ketnet+:482000000:QAM_64:4273:4274:4272<br>
-----------------------------------------------------------------------------------------------------<br>
Next I'v tried 2 more steps:<br>
- mythtv-setup -> input connections there set to import the above
channels.conf -> gives an error<br>
- mythtv-setup -> input connections - don't remember exactly what
it's named, but you can enter freq, QAM etc.<br>
tried several possibilities, most settings to auto, but also filled
in with settings from be-Schoten: no channels found...<br>
<br>
I'm out of ideas at the moment...<br>
Any idea's?<br>
Thanks for your suggestions!!<br>
<br>
Erwin<br>
<br>
<br>
<br>
Stephen Robertson wrote:
<blockquote
cite="mid:ba7973f0911260847q394b36b6u5826b8fa37812f75@mail.gmail.com"
type="cite">
<pre wrap="">2009/11/26 Erwin Panen <a class="moz-txt-link-rfc2396E" href="mailto:erwinpanen@fastmail.fm"><erwinpanen@fastmail.fm></a>:
</pre>
<blockquote type="cite">
<pre wrap="">Hi list,
I'm looking for confirmation of people who have the Hauppauge HVR-4000 up
and working.
Detail:
- dvb-s
- dvb-t (most important for me)
- what viewing solution used: mythtv? / other
I have the card recognized and registered (Kubuntu 0810).
Channel searching DVB-T works out of the box with Kaffeine.
Trying to get this card to work with MythTV v0.21
Thanks for your help,
Erwin
</pre>
</blockquote>
<pre wrap=""><!---->
What is not working for you? How far do you get when trying to use
this within MythTV?
Stephen.
</pre>
</blockquote>
</body>
</html>