<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Stephen, <br>
<br>
Thanks for replying.<br>
Within MythTV - not far at all :-(<br>
- I'm working on two separate setups each residing within their own
hd partition to keep things separated.<br>
Actually my goal is to get this to work with LinuxMCE, hence
Kubuntu 0810 based.<br>
As I seem to also run into LMCE specific problems, I want to get
it working on a stock Kubuntu 0810 too.<br>
- What do I have?<br>
I used liplianin drivers but am open to change to whatever will
make this work.<br>
With the liplianin drivers in place, the firmware gets loaded,
and the card is properly registered. (dmesg)<br>
From that point: Kaffeine will see dvb:0 and dvb:1 and will
successfully scan dvb:1 (dvb-t) for channels.<br>
So Kaffeine viewing works with audio and image.<br>
- With dvb-utils -> scan I have managed to scan for channels
> channels.conf<br>
I put this file in ~/.tzap/channels.conf but seem to be unable
to get this information into MythTV.<br>
- Next when installing mythtv v0.21 I need to put in place a fake
/dev/adapter1 next to existing /dev/adapter0<br>
all /dev/adapter/0/***1 devices are symlinked to the new fake
/dev/adapter1/***0 device.<br>
Startup mythtv-setup gave me the usual quirks (admittedly I'm
not a MythTV expert (yet :-) )<br>
When entering capture cards, I can select the DVB DTV Capture
card (v3.x)<br>
with the symlinks in place, I can then change to DVB device: 1<br>
And here it ends.<br>
<br>
At the moment I'm even delving into how to modify settings directly
into mythconverg database.<br>
I have webmyth installed too, so this can also help to make adjustments.<br>
<br>
So resuming:<br>
I'm looking for how to link /dev/dvb/adapter* correctly into mythconverg<br>
and looking for how to get my channel.conf into mythconverg<br>
<br>
If you need more information, let me know.<br>
<br>
Thanks,<br>
<br>
Erwin<br>
Stephen Robertson wrote:
<blockquote
cite="mid:ba7973f0911260847q394b36b6u5826b8fa37812f75@mail.gmail.com"
type="cite">
<pre wrap="">2009/11/26 Erwin Panen <a class="moz-txt-link-rfc2396E" href="mailto:erwinpanen@fastmail.fm"><erwinpanen@fastmail.fm></a>:
</pre>
<blockquote type="cite">
<pre wrap="">Hi list,
I'm looking for confirmation of people who have the Hauppauge HVR-4000 up
and working.
Detail:
- dvb-s
- dvb-t (most important for me)
- what viewing solution used: mythtv? / other
I have the card recognized and registered (Kubuntu 0810).
Channel searching DVB-T works out of the box with Kaffeine.
Trying to get this card to work with MythTV v0.21
Thanks for your help,
Erwin
</pre>
</blockquote>
<pre wrap=""><!---->
What is not working for you? How far do you get when trying to use
this within MythTV?
Stephen.
</pre>
</blockquote>
</body>
</html>