<br>Hello,<br><br>A few weeks ago, my HDHomerun stopped receiving QAM channels. A quick investigation revealed that Time Warner had changed the channels around. Using the HDHomerun Windows program, I was able to relocate all of the relevant channel info. I then updated the channel & dtv_multiplex tables to reflect the new information and ...... nothing. The problem was not resolved. Can someone look over my steps and see if I did something wrong? Or am I trying to solve this problem the wrong way?<br>
<br>Here's WUTV (aka Fox):<br><br>SCANNING: 687000000 (us-irc:106, us-cable:106)<br>LOCK: qam256 (ss=97 snq=94 seq=100)<br>TSID: 0x2397<br>PROGRAM 1: 0<br>PROGRAM 2: 0<br>PROGRAM 3: 0<br>PROGRAM 4: 0<br><br><br>I updated the frequency to 687000000 in the dtv_multiplex table where dtv_multiplex.mplexid=channel.mplexid. I then updated freqid to 106 (from us-cable), and serviceid to 1 (from PROGRAM 1) where channum="The old Fox HD Channel Number" When I try to tune that channel in through LiveTV, it shows a strength of 97%, but sits there at (La__) Partial Lock until it times out.<br clear="all">
<br>Relevant info:<br>mythtv-0.20.2<br>hdhomerun firmware - 20090830<br><br><br>-- <br>-Rob<br><br>Hell hath no fury like a snowplow driver from Cheektowaga who gave<br>up cable and Canadian beer so he could afford Bills season tickets.<br>