<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.18812">
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px">
<DIV
style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B>
<A title=totallymaxed@gmail.com href="mailto:totallymaxed@gmail.com">Andrew
Herron</A> </DIV>Hmmm... ok that is a significant detail! Can you temporarily
add your DVB-S to your MBE and see if they work ok?<BR><BR>
<P></P>
<DIV>_______________________________________________<BR></DIV></BLOCKQUOTE>
<DIV><FONT size=2 face=Arial>I thought that it might make a difference (not that
it should). I am not going to be able to do it for around a week.
Difficulty is that the MBE and SBE are in different parts of the house.
Obviously, to test this, I am going to have to get the satellite signal to the
MBE somehow, and we have visitors comming.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Couldn't be bothered to re-type my config, so here
is a copy of my previous post, which at the end has the config and setup. I have
changed versions of trunk since then, waiting for a couple of hours of comfort
before I go to the next database schema, currently: 21075. There were no
responses to this, so I think that it is possibly an edge-case
scenario.</FONT></DIV>
<DIV><FONT size=2 face=Arial>Regards, </FONT></DIV>
<DIV><FONT size=2 face=Arial>Gareth</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>----</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV>Hi,<BR>Can someone confirm whether they have a similar setup running?<BR>I
am running trunk (21006, ?tuesday?), and cannot decide whether<BR><BR>this is a
bug - so I'll open a ticket (there is one open on scanning, but I <BR>believe
this is channel scanning, not EIT)<BR>user error - happy for this to be
shown<BR>not (re-)implemented /yet/ in trunk- so I'll shut up and do something
else, <BR>I believe the EIT scanner was re-written. (I understand that by
running <BR>trunk there are areas which are likely to not be in a production
capable <BR>state, but I cannot see any tickets which relate to this problem
<BR>specifically on EIT)<BR><BR><BR>My previous setup was .20, and it worked
as:<BR><BR>MBE - 3x DVB-T tuner cards with a video source set as DVB-T. Used
over <BR>air-guide as only listings source<BR><BR>SBE - 1x Hauppage Nova-HD-S2,
with a video source set as DVB-S. Used over <BR>air-guide as only listings
source<BR><BR>Now I am on trunk with the same hardware, and in theory same
configuration. <BR>The MBE can correctly perform EIT scans on the DVB-T cards,
with logging <BR>EIT, I can see the shows being detected.<BR><BR>The SBE does
not seem to correctly perform the EIT scan. It does not appear <BR>to download
the shows and list them the same was as the MBE with logging <BR>EIT. If I use
liveTV, I can use the DVB-S card to correctly change to <BR>channels (correct
channel number as before) and watch TV, but no EPG.<BR><BR>So, if the question
above cannot be answered simply, can we get responses on <BR>the following (if
they are positive, it must be user error!):<BR><BR>Is anyone using trunk with
EIT and Freesat ONLY<BR>Is anyone successfully running trunk with EIT and
Freesat as the main <BR>listings grabber in a SLAVE Backend
ONLY?<BR><BR>Thanks,<BR>Gareth<BR><BR><BR>(configuration steps if someone wants
to show me the error of my ways)<BR>After initial failure, I went to SBE, and
deleted video sources, I then <BR>deleted video cards on /this host/<BR>I then
went to MBE, deleted video sources, and then deleted cards on /ALL
<BR>HOSTS/<BR>I then added 3x DVB-T (all x2 multirec) cards to the MBE + video
source <BR>called DVB-T. Performed scan for channels. Ran mythfilldatabase,
started <BR>MBE, EIT started for these cards.<BR>With MBE running, went to SBE.
Added DVB-S card (x2 multirec+LNB eurpoean <BR>setup, +recording options, 2000ms
timeout, allow use for active EIT, not <BR>open on demand), and created video
source DVB-S. I then had to use scandvb <BR>to scan the Astra-28.2E, then used
this as a channels.conf import Found 1045 <BR>non-conflicting channels. Then 51
conflicting channels, used suggest to add <BR>them. Then 33 conflicting mpeg
channels, again used suggest to add them. I <BR>then went back and performed a
scan of existing transports. (for both of <BR>these I have used the 'ignore
signal timeout option' which I hadn't before, <BR>and initially I did try
without the second scan).<BR>I then exited mythtv-setup on the SBE. There was no
request to run <BR>mythfilldatabase. I started the SBE. and nada. Here I have
made the <BR>assumption that the MBE should not need to be restarted (it has
been a <BR>couple of times through these problems anyway).<BR><BR>SBE mythlog
(i.e. non-working):<BR>2009-07-25 17:33:33.139 EITScanner (7): Now looking for
EIT data on <BR>multiplex of channel 4704<BR>2009-07-25 17:33:33.139 EITCache:
Pruning all entries that ended before UTC <BR>2009-07-24T17:43:54<BR>2009-07-25
17:33:33.139 EITCache: Deleting old cache entries from the
<BR>database<BR>2009-07-25 17:33:33.460 EITScanner (7): Started passive
scan.<BR>2009-07-25 17:43:56.784 EITScanner (7): Now looking for EIT data on
<BR>multiplex of channel 4222<BR>2009-07-25 17:43:56.784 EITCache: Pruning all
entries that ended before UTC <BR>2009-07-24T17:54:17<BR><BR>No data in EPG
either (as viewed by mythweb). <BR></DIV></BODY></HTML>