<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Arial; font-size: 12pt; color: #000000'>When the card is scanning, do you see any signal strength bars? <br><br>Hmmm. Try one of the non-mythtv scan utilities. Go to the Mythtv wiki and look up the adding digital channels page. I just used that to sort through the dozens of digital channels that were recently added.<br><br>I think the package I installed was dvbscan . . . try 'yum list dvb*'<br><br><br><br>----- Original Message -----<br>From: "Bryan Cromwell" <bcromwell.mailinglists@gmail.com><br>To: mythtv-users@mythtv.org<br>Sent: Sunday, March 1, 2009 8:04:10 AM GMT -08:00 US/Canada Pacific<br>Subject: [mythtv-users] HVR-1600 scan (Digital) can't find any channels<br><br>Have comcast in atlanta, I can get several digital channels on my plasma so I know they are out there. I can see all analog channels find but when I scan for digital (qam-256) I don't find anything at all. Am I missing something? I have tried virtually every combination in the scan screen (cable,hrc,irc,256,126,64). <br>
<br> 2.6.27.9-159.fc10.i686<br><br>cx18: Start initialization, version 1.1.0<br>cx18-0: Initializing card 0<br>cx18-0: Autodetected Hauppauge card<br>cx18 0000:02:09.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21<br>
cx18-0: Unreasonably low latency timer, setting to 64 (was 32)<br>cx18-0: cx23418 revision 01010000 (B)<br>cx18-0: Autodetected Hauppauge HVR-1600<br>cx18-0: Simultaneous Digital and Analog TV capture supported<br>tuner 2-0043: chip found @ 0x86 (cx18 i2c driver #0-1)<br>
tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)<br>cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0)<br>cx18-0: Registered device video0 for encoder MPEG (64 x 32 kB)<br>DVB: registering new adapter (cx18)<br>
cx18-0: DVB Frontend registered<br>cx18-0: Registered DVB adapter0 for TS (32 x 32 kB)<br>cx18-0: Registered device video32 for encoder YUV (16 x 128 kB)<br>cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes)<br>
cx18-0: Registered device video24 for encoder PCM audio (256 x 4 kB)<br>cx18-0: Registered device radio0 for encoder radio<br>cx18-0: Initialized card: Hauppauge HVR-1600<br>cx18: End initialization<br>cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)<br>
cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)<br>cx18-0: FW version: 0.0.74.0 (Release 2007/03/12)<br>cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)<br><br>
<br>_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
</div></body></html>