I've installed two AVerMedia AVerTVHD MCE A180 PCI cards. They are both recognized. When I do a modprobe<br><br>modprobe saa7134 card=75<br><br>The first card shows<br><br>[24779.475969] saa7130[0]: found at 0000:00:08.0, rev: 1, irq: 16, latency: 32, mmio: 0xec000000<br>
[24779.475982] saa7130[0]: subsystem: 1461:1044, board: AVerMedia AVerTVHD MCE A180 [card=75,insmod option]<br>[24779.476030] saa7130[0]: board init: gpio is 10400<br><br>However the second card shows<br><br>[24779.667103] saa7130[1]: found at 0000:00:0a.0, rev: 1, irq: 18, latency: 32, mmio: 0xec001000<br>
[24779.667111] saa7130[1]: subsystem: 1461:1044, board: UNKNOWN/GENERIC [card=0,autodetected]<br>[24779.667125] saa7130[1]: board init: gpio is 10400<br><br>I am not sure why the second card is not getting the "card=75" option on the modprobe.<br>
<br>The first card gets a /dev/video0 and a /dev/dvb/adapter0<br><br>The second card only gets a /dev/video1<br><br>The first card shows the firmware loading<br><br>[24779.860274] nxt200x: NXT2004 Detected<br>[24779.860382] DVB: registering new adapter (saa7130[0])<br>
[24779.860388] DVB: registering frontend 0 (Nextwave NXT200X VSB/QAM frontend)...<br><br>The second card is not registered as a DVB adapter. Probably because it is not getting the card=75 option.<br><br>The first card is working great. Picture and sound are perfect.<br>
<br>Any ideas?<br><br><br><br><br>