<div>I am having some trouble getting my ATI Remote Wonder II remote working with LIRC. I am using Mythdora 5 and the install process ran properly except that LIRC does not work.</div>
<div> </div>
<div>LIRC does not appear to load at all during startup. lsmod | grep lirc comes back with nothing. If I modprobe lirc_atiusb, lirc_atiusb & lirc_dev both load, and they do not give any errors in dmesg, but when I start lircd afterwards no /dev/lirc or /dev/lirc0 devices are created. No errors are being generated that I can find. If I start lircd from the terminal, it starts without error, but still does not create /dev/lirc or /dev/lirc0. (Running irw fails after this, but I assume that's because it can't find a valid lirc device to use.)</div>
<div> </div>
<div>I have blacklisted the ati_remote kernel modules to avoid conflict with the lirc_atiusb driver. My lircd.conf file was created by the Mythdora script, and it appears to be correct for a Remote Wonder II so I don't think it's a lircd.conf problem, but if anybody has a known-good lircd.conf file for a Remote Wonder II I'd appreciate a copy. (My lircd.conf also matches the one in the Remote Wonder II section of the wiki, so I'm assuming it's good.)</div>
<div>
<div> </div>
<div>dmesg output from a manual modprobe:</div>
<div>lirc_dev: IR Remote Control driver registered, major 61 </div>
<div>lirc_atiusb: USB remote driver for LIRC $Revision: 1.68 $<br>lirc_atiusb: Paul Miller <<a href="mailto:pmiller9@users.sourceforge.net">pmiller9@users.sourceforge.net</a>><br>usbcore: registered new interface driver lirc_atiusb</div>
<div> </div>
<div>Any suggestions on where to look would be appreciated. At this point, I'd even be happy to get an error message. At least then I'd have something to start troubleshooting from.</div>
<div> </div>
<div>Thanks,</div>
<div> </div>
<div>-Peter</div></div>