I am having some problems with this now. It works ok on channels 0-9, but when I go above that it seems to put the last number in the front such as 23 becomes 323. Also, the process on the STB LCD appears to only get a 2, then it clears ( almost like it's starting over) and then it receives a 323. <br>
<br>./sa4250 23 -v<br>node 0: vendor_id = 0x000090a9 model_id = 0x00000000<br>node 1: vendor_id = 0x00001ac3 model_id = 0x000010cc<br>Device acquired on node 1<br>Changing channel 23<br>AV/C Command: cmd0=0x00487ce7 cmd1=0x04001700 cmd2=0xff000000<br>
AV/C Command: cmd0=0x00487c67 cmd1=0x04001700 cmd2=0xff000000<br><br><br>I don't know c well enough to figure this one out. <br><br>I attached the source file I have hacked up.<br><br>I'd appreciate help with this.<br>
<br><br><br>