<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Brian Wood wrote:
<blockquote cite="mid:48F61E18.80507@beww.org" type="cite">
<pre wrap="">John Payne wrote:
</pre>
<blockquote type="cite">
<pre wrap="">I've been trying to trace some image-stuttering issues with recordings
on one channel only when recording via my PVR150's (I have 2 installed).
I was concentrating on playback profiles etc, but further investigation
shows that it must be a recording problem - I also get the stuttering if
I play recordings directly on the backend, ie without mythtv, using vlc.
What's odd is that I can't see the effect on any other channels recorded
over the PVR150s, and I don't have problems watching that channel on a
normal TV, except that the sound level is lower than other channels,
which may suggest a weaker signal(?) I'm using a cable feed
I also have a DVB-T card and with the dvb utils I can monitor the signal
parameters - is there a similar utility for Analog cards such as the PVR150?
Yesterday I updated the ivtv firmware but I don't know if that will help
and I need to do some more recordings first.
Anyone got any ideas or suggestions?
</pre>
</blockquote>
<pre wrap=""><!---->
What channel is having the problem? If it is 4, 5 or 6 you might have
the wrong frequency table.
beww
_______________________________________________
mythtv-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:mythtv-users@mythtv.org">mythtv-users@mythtv.org</a>
<a class="moz-txt-link-freetext" href="http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users">http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users</a>
</pre>
</blockquote>
Hmm,<br>
I'm in Europe so not sure if we're on the same wavelength... It's
actually channel S28<br>
<br>
I'll try to fine tune using the TV, which is also connected to the
cable directly, then use the best setting for mythtv. I don't have the
display setup on the backend and can't Watch TV, and my frontend isn't
near my backend (if you know what I mean) and I'm fairly lazy....;-)<br>
<br>
I'll let you know<br>
John<br>
</body>
</html>