Just to make sure, do you have a TV with a QAM tuner ?<br><br>If so I would try to connect it at the same outlet with the same cable you used for your Fusion cartd.<br>If you get the same artifacts something maybe wrong with your line.<br>
It will help to narrow the problem down to the card / kernel module if the TV gets a perfect reception...<br><br><br><div class="gmail_quote">On Sat, Jun 7, 2008 at 2:36 PM, Matthew Redmon <<a href="mailto:mredmon@gmail.com">mredmon@gmail.com</a>> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">On Sat, Jun 7, 2008 at 9:35 AM, Sebastien Astie <<a href="mailto:sastie@gmail.com">sastie@gmail.com</a>> wrote:<br>
><br>
> I had the same problem tuning QAM with my HDHR but only on a few channels.<br>
><br>
> I turned out to be due to a rf amplifier at the distribution point in my house.<br>
> Once I changed the amplifier with one provided by the cable company I didn't have as much corruption, it was a huge improvement.<br>
> then I changed all my coax cables with coax cables from blue jeans cable <a href="http://bluejeanscable.com" target="_blank">http://bluejeanscable.com</a> and my picture quality was perfect.<br>
><br>
><br>
> On Sat, Jun 7, 2008 at 11:38 AM, Matthew Redmon <<a href="mailto:mredmon@gmail.com">mredmon@gmail.com</a>> wrote:<br>
>><br>
>> Hi! I've been trying to get my two DViCO FusionHDTV 5 Lite cards working with a new install of FC9. Everything seems to work just fine except that the video I get from the cards is corrupt (see video at: <a href="http://www.youtube.com/watch?v=rH1tsiPB8us" target="_blank">http://www.youtube.com/watch?v=rH1tsiPB8us</a>). I know the cards are fine, as they worked on this machine previously using FC5 and they currently work if I boot into Windows XP.<br>
>><br>
>> I am using the drivers included in the 2.6.25.3-18 kernel to record QAM-256 cable from Comcast in Seattle, WA.<br>
>><br>
>> The cards are correctly auto-detected as card 135 with tuners 0043 & 0061. I scanned for channels using dvb-apps and used a script to cut down the ~250 channels found to just those that would tune (presumably, the unencrypted channels). Of those 56, they all have the corruption seen in the video.<br>
>><br>
>> Any ideas? Anybody have one of these cards working with a recent kernel?<br>
>><br>
>> Thanks!<br>
>><br>
>> ~Matt<br>
>><br>
<br>
Thank you for the suggestion but that doesn't seem to be the problem<br>
I'm having. I didn't think it was since it occurred over all the<br>
channels but only when in linux. To make sure, I ran a cable directly<br>
from one of my tuners to the cable outlet, bypassing my amp, and<br>
tested it. I got the same corruption (the same level of corruption,<br>
too).<br>
<br>
Any more suggestions?<br>
<br>
Thanks!<br>
<br>
~Matt<br>
_______________________________________________<br>
mythtv-users mailing list<br>
<a href="mailto:mythtv-users@mythtv.org">mythtv-users@mythtv.org</a><br>
<a href="http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users" target="_blank">http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users</a><br>
</blockquote></div><br>