I have followed the direction at http://mythtv.org/wiki/index.php/KWorld_Global_TV_Terminator for setup with mythdora to work as tuner 2, everything works but i only get black screen. so i tested&nbsp; as excalty at terminal commands.<br><br><pre>mplayer tv://12 -tv driver=v4l2:device=/dev/video2:chanlist=us-cable:alsa:\<br>adevice=hw.1,0:amode=1:audiorate=32000:forceaudio:volume=100:immediatemode=0:norm=NTSC</pre>it worked like charmed. so i was hoping someone could shed some kind of light where i should start look for.<br><br>$ dmesg | grep saa<br>saa7130/34: v4l2 driver version 0.2.14 loaded<br>saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)<br>saa7133[0]: found at 0000:02:0a.0, rev: 209, irq: 11, latency: 64, mmio: 0xd2100800<br>saa7133[0]: subsystem: 1131:0000, board: V-Stream Studio TV Terminator [card=65,insmod option]<br>saa7133[0]: board init: gpio is 40<br>input: saa7134 IR (V-Stream Studio TV&nbsp; as /class/input/input7<br>tuner
 2-004b: chip found @ 0x96 (saa7133[0])<br>saa7133[0]: Huh, no eeprom present (err=-5)?<br>saa7133[0]: registered device video1 [v4l2]<br>saa7133[0]: registered device vbi1<br>saa7133[0]: registered device radio1<br><br>thanks in advance!<br>